Revox präsentiert die neue Revox B77 MK III und zugleich seine neue, eigene Revox Analog Master Tapes Collection. Beides gefertigt im Revox KLANGWERK in Villingen für ein perfektes Zusammenspiel.
>> Mehr erfahren>> Alle anzeigenVon Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Stereo
Ausstattungsliste: Tannoy Kensington GR
Specification | |
PERFORMANCE | |
Recommended amplifier power | 20 - 250 Watts |
Continuous power handling | 125 Watts RMS |
Peak power handling | 500 watt |
Sensitivity | 93 dB (2.83 Volts @1 metre) |
Nominal impedance | 8 Ohms |
Minimum Impedance | 5 ohm |
Frequency Response | 29 Hz - 27 kHz (-6 dB) |
Dispersion | 90 degrees conical |
DRIVE UNITS | |
Dual Concentric™ high frequency | 52 mm (2.00") 52 mm (2”) aluminium/magnesium alloy dome with round voice coil |
Dual Concentric™ low frequency | 250 mm (10”) with paper pulp cone and twin roll impregnated fabric surround.52 mm (2”) round wire voice coil |
CROSSOVER | |
Frequency | 1.1kHz |
Type | Bi-wired, hard-wired passive, low loss. Time compensated.2nd order low pass. 2nd order high pass. Deep cryogenically treated |
Adjustment | /- 3 dB over 1 kHz to 27 kHz shelving, 2 dB to -6 dB per octave over 5 kHz to 27 kHz slope |
CONSTRUCTION | |
Enclosure type | Distributed Port |
Volume | 105L (3.7 cu.ft) |
Dimensions | 1100 x 406 x 338mm (43.50 x 16.00 x 13.33" ) |
Finish | Particle board with high density birch ply baffle and rear panel, 18 mm (0.71”) thickness. Internally cross braced and heavily damped. |
305-2128
MD Sound GmbH & Co. KG |