
Form follows function ist ja ein geflügeltes Wort für Design um die technischen Notwendigkeiten herum. Dass man aber auch beide Aspekte gleichwertig behandeln und auf die Spitze treiben kann, zeigt uns die neue Serie 1528 von Arendal.
>> Mehr erfahren>> Alle anzeigen
Die hochwertigen Sessel und Sofas von Sofanella sind modern, bezahlbar und schaffen ein gemütliches sowie ein bequemes Heimkinoerlebnis
>> Mehr erfahren>> Alle anzeigenKategorie: Vollverstärker
Ausstattungsliste: Perreaux éloquence 250i
General Features | |
User Controls | |
Interactive Menu System Infrared (IR) | |
Remote Control | |
Volume Up/Down | |
I/O Compliment | |
Inputs | 1 pair Balanced Inputs (XLR) |
4 pairs Unbalanced Inputs (RCA) | |
1 Amp In (RCA) | |
1 Auxiliary (3.5mm jack) | |
Outputs | 1 pair Unbalanced Line Outputs (RCA) |
1 pair Unbalanced Preamplifier Outputs (RCA) | |
2 pairs Binding Posts per channel | |
1 Headphone (6.35mm jack) | |
Misc | 1 Trigger input (3.5mm jack) |
1 Trigger output (3.5mm jack) | |
1 External IR input (3.5mm jack) | |
1 IR output (3.5mm jack) | |
1 RS232 serial port (RJ45) | |
Optional Modules* | |
USB Digital to Analogue Converter (DAC) | 24bit/192khz upsampling allows high quality digital audio connections to be made. Inputs include 2x Coax, 2x Optical (Toslink) and 1x USB audio. |
MM/MC Phono Stage | Allowing both Moving Magnet (MM) and Moving Coil (MC) cartridge connection. |
* These optional modules are retrofittable and available after purchase | |
Specifications | |
Dimensions | Width: 426mm (16.8") |
Depth: 344mm (13.5") | |
Height: 149mm (5.9") | |
Weight: 25kg (55lb) | |
Amplifier | |
Rated Power Output (per channel): | 250W into 8Ω |
500W into 4Ω | |
Maximum Power Output (prior to clipping, per channel) | 360W into 8Ω |
530W into 4Ω | |
Total Harmonic Distortion (THD+N) | Typically: 0.002% @ 1kHz, 250W into 8Ω |
20Hz to 20kHz: 0.010%, 250W into 8Ω | |
Frequency Response | 20Hz to 20kHz: +0.00dB, -0.15dB |
5Hz to 60kHz: +0.00dB, -0.50dB | |
Damping Factor | 800 @ 1kHz, 250W into 8Ω |
Signal to Noise Ratio (unweighted) | better than 98dB, ref. 250W |
Preamplifier | |
Input Impedance | Unbalanced 12kΩ |
Balanced 22kΩ | |
Input Overload | Unbalanced: 8Vrms |
Balanced: 8Vrms | |
Volume Control Range | -95.5dB to +31.5dB |
Volume Control Resolution | 0.5dB per step |
nput Volume Trim Range | ±40dB |
Balance Resolution | 0.5dB |
Balance Range | ±40dB |
Headphone Amplifier | |
Headphone Rated Power Output: | 1.0W into 32Ω |
150mW into 300Ω | |
Headphone Total Harmonic Distortion + Noise | Typically: 0.001% @ 1kHz, 1.0W into 32Ω |
20Hz to 20kHz: less than 0.002%, 1.0W into 32Ω | |
Headphone Volume Trim Range | ±40dB |
éloquence DAC Module Specifications | |
Digital Inputs | 2 SPDIF Coax (BNC) |
2 SPDIF Optical (Toslink) | |
1 USB (Type B) | |
Input Sample Rate | 32, 44.1, 48, 88.2, 96, 176.4, 192kHz (Coax, Optical) |
32, 44.1, 48kHz (USB) | |
Input Word Length (maximum) | 24-bit (Coax, Optical) |
16-bit (USB) | |
Input Impedance | 75Ω (Coax) |
Transformer Coupled | Coax: yes |
Optical: no | |
USB: no | |
Analogue Section | |
Digital to Analogue Conversion | 24-bit / 192kHz |
Output Voltage | 2.0Vrms @ 0dBFS |
Total Harmonic Distortion + Noise | Typically 0.002%, 20Hz-20kHz @ 0dBFS |
Frequency Response | 20Hz to 20kHz: +0.0dB, -0.1dB |
5Hz to 94kHz: +0.0dB, -3.0dB | |
Dynamic Range (unweighted): better than 115dB @ 0dBFS Signal to Noise Ratio (unweighted): | better than 115dB @ 0dBFS |
Dynamic Range (unweighted): better than 115dB @ 0dBFS Signal to Noise Ratio (unweighted): | better than 115dB @ 0dBFS |
Channel Separation | better than 110dB @ 0dBFS |
Stop Band | 105kHz |
Stop Band Attenuation | 125dB |
éloquence Phono Module Specifications | |
Input Impedance | Low Gain (MM): 47kΩ |
High Gain (MC): 100Ω | |
Input Capacitance | 22pF |
Gain | Low Gain (MM): 40dB |
High Gain (MC): 60dB | |
Total Harmonic Distortion + Noise | Typically: 0.002% @ 1kHz, low gain setting |
20Hz to 20kHz: less than 0.010%, low gain setting | |
RIAA Accuracy | ±0.5dB, 20Hz-20kHz |
Signal to Noise Ratio (unweighted) | better than 85dB, low gain setting |