390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigen
488_23522_2
Topthema: Ingenieurskunst in Perfektion
Revelation RX2 PRO – High-End Zweikanalendstufe von Brax
Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigenKategorie: Vollverstärker
Ausstattungsliste: Anthem STR Integrated Amplifier
Ausstattung & technische Daten
| PHONO PREAMPLIFIER | |
| Input Impedance | 100 Ω (MC), 47 kΩ (MM) |
| Input Capacitance | 270 pF (MM) 270 pF (MM) |
| Maximum Input (at 1 kHz for <0.1% THD 20 Hz - 20 kHz) | 3.6 mV (MC), 37.7 mV (MM) |
| Gain (default at 1 kHz, user adjustable ± 20 dB) | 55 dB (MC), 35 dB (MM) |
| RIAA Response | ± 0.1 dB (20 Hz to 20 kHz) |
| THD+N (at 1 kHz, 20 Hz - 20 kHz BW, 2 Vrms output) | 0.008% (MC), 0.005% (MM) |
| S/N Ratio (at 1 kHz, IEC-A, 2 Vrms output) | 82 dB (MC), 96 dB (MM) |
| PREAMPLIFIER | |
| Frequency Response | digital-in, 192 kHz 10 Hz - 50 kHz (+0.00, -0.50 dB) |
| digital-in, 96 kHz 10 Hz - 45 kHz (+0.00, -0.50 dB) | |
| digital-in, 44.1 kHz 10 Hz - 20 kHz (+0.00, -0.03 dB) | |
| analog-in, DSP mode 10 Hz - 40 kHz (+0.02, -0.20 dB) | |
| analog-in, direct mode 10 Hz - 80 kHz (+0.00, -0.10 dB) | |
| THD+N (at 1 kHz, 20 Hz - 20 kHz BW, 2 Vrms output) | digital-in, 44.1 kHz, 0 dBFS 0.0008% |
| analog-in, DSP mode, 1 Vrms input 0.001% | |
| analog-in, direct mode, 1 Vrms input 0.0020% | |
| SNR (at 1 kHz, IEC-A, 2 Vrms output) | digital-in, 44.1 kHz, 0 dBFS 112 dB |
| analog-in, DSP mode, 2 Vrms input 110 dB | |
| analog-in, direct mode, 2 Vrms input 120 dB | |
| Maximum Output (<0.1% THD) | 2.2 Vrms except analog-direct 3.3 Vrms |
| XLR Configuration | Pin 1: Ground, Pin 2: Normal, Pin 3: Inverted |
| POWER AMPLIFIER | |
| Power Output (per channel) (Continuous, 20 Hz - 20 kHz, <1% THD) | Impedance 8Ω: 200 W |
| Impedance 4Ω: 400 W | |
| Impedance 2Ω: 550 W | |
| THD (100 W) | 0.002% (1 kHz), 0.015% (20 kHz) |
| IMD (100 W) | ITU-R (19 kHz + 20 kHz) 0.0007% |
| SMPTE (60 Hz + 7 kHz) 0.005% | |
| SNR (IEC-A, ref. 200 W) | 114 dB |
| Frequency Response (20 Hz - 20 kHz) | ± 0.1 dB |
| Power Bandwidth (-3 dB at 200 W into 8 ohms) | 80 kHz |
| Slew Rate | 30 V/μs |
| Damping Factor (20 Hz - 1 kHz) | 330 |
| Channel Separation | 101 dB (100 Hz), 61 dB (10 kHz) |
| POWER REQUIREMENT | |
| 120 V version | In countries where the line voltage is 120 V, this product operates from a single phase AC power source that supplies between 108 V and 132 V at a frequency of 60 Hz. |
| 220-240 V version | In countries where the line voltage is 220, 230, or 240 V, this product operates from a single phase AC power source that supplies between 198 V and 264 V at a frequency of 50 Hz. |
| POWER CONSUMPTION | |
| Standby | 0.38 W (120V), 0.45 W (240V) |
| Standby + Network | 1.1 W (120V), 1.2 W (240V) |
| Idle | 40 W |
| Typical Use | 250 W |
| High Output | 500 W |
| DIMENSIONS | |
| Height | 6-3/4” (17.2 cm) |
| Width | 17” (43.2 cm) |
| Depth (not including power cord) | 17-1/2” (44.5 cm) |
| Weight (unpacked) | 40 lb (18 kg) |
