Topthema: FINEST AUDIO SHOW Vienna 2024 Klangvolles Wochenende auf der HiFi-Messe in Österreich

Im Mittelpunkt der FINEST AUDIO SHOW Vienna am 23. und 24. November 2024 in Wien steht die Leidenschaft für HiFi-Technik, Musikwiedergabe und den perfekten Klang.

>> Mehr erfahren >> Alle anzeigen

487_23559_2

Topthema: Totale Eleganz Arendal 1528 Monitor 8

Form follows function ist ja ein geflügeltes Wort für Design um die technischen Notwendigkeiten herum. Dass man aber auch beide Aspekte gleichwertig behandeln und auf die Spitze treiben kann, zeigt uns die neue Serie 1528 von Arendal.

>> Mehr erfahren >> Alle anzeigen

Kategorie: Tonabnehmer

Ausstattungsliste: van den Hul COLIBRI XCP & XCM

Ausstattung & technische Daten

Specification
XC Version	-(X = cross shaped modulator, C = matched crystal Copper wire coils)
- Low output all-round model
- Output voltage: 0.22 mV/channel
- Types available: XCP and XCM (P and M type suffix)
Stylus Replacement Available	Stylus replacement and other services available on request
Stylus Shape	VDH - IS
Stylus Radii	2 x 85 Micron
Frequency Range	5 - 65.000 Hz
Tracking Force	13.5 - 15 mN. Versions optimized for lower tracking forces (allowing very light arms) can be built on special request. These have a higher static compliance.
Static Compliance	35 Micron/mN. Versions optimized for lower tracking forces (allowing very light arms) can be built on special request. These have a higher static compliance.
Tracking Ability at 15mN at 315Hz	70 Micron
Output Voltage at 1 kHz at 5.7 cm/s eff.	0.22 mV RMS
Channel Unbalance	< 0.5 dB
Channel Separation at 1kHz / 10kHz	> 35 / > 30 dB
Equivalent Stylus Tip Mass	0.24 Milligram
System Weight	8.2 Gram
P and M type suffix: Each of the three above mentioned main versions of The COLIBRI are available with either: - A regular carbon-nylon plastic body. Total cartridge weight is 6 gram. Suitable for arms with an effective tone arm mass of 8 gram to 14 gram.
- A metal body. Total cartridge weight is 7 gram. Suitable for arms with an effective tone arm mass of 10 gram to 14 gram. The metal bodied version carries the -M suffix in its name.
Vertical Tracking Angle	22 Degrees
Optimum Load Capacitance	Non critical
Recommended Load Impedance	500 - 1000 Ohm
Recommended Eff Tone arm Mass	Versions optimized for lower tracking forces (allowing very light arms) can be built on special request. These have a higher static compliance.
P and M type suffix: Each of the three above mentioned main versions of The COLIBRI are available with either: - A regular carbon-nylon plastic body. Total cartridge weight is 6 gram. Suitable for arms with an effective tone arm mass of 8 gram to 14 gram.
- A metal body. Total cartridge weight is 7 gram. Suitable for arms with an effective tone arm mass of 10 gram to 14 gram. The metal bodied version carries the -M suffix in its name.
The cartridge has been optimized regarding an EFFECTIVE tone arm mass of 11 - 12 gram. Heavier arms CAN produce tracking and resonance problems and arms with an effective mass exceeding 16 gram WILL CERTAINLY!
Please note that an extremely short cantilever and a high tracking ability and heavy arms DUE TO PHYSICS will never yield a happy marriage.
Moving Coil Resistance per channel	21 Ohm +/- 10%