
Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigen
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Martin Audio CDD-LIVE 8
ACOUSTICS | |
TYPE | Ultra-Compact, Coaxial Differential Dispersion powered two-way system |
FREQUENCY RESPONSE | 70Hz – 20kHz ±3dB, -10dB @ 50Hz |
DRIVERS | LF: 8” (200mm)/2” (50mm) voice coil, long excursion, shared ferrite motor system with HF |
HF: 1” (25mm) exit/1.4” (38mm) voice coil, polyimide dome compression driver | |
INPUT SENSITIVITY | -26dBu for 100dB SPL |
MAXIMUM SPL | 117dB continuous / 123dB peak |
DISPERSION | 110˚-80˚ horizontal, 60˚ vertical (user-rotatable) |
CROSSOVER | 2.3kHz Active LR8 Balance presets for pole mount/ pole mount with sub/ stage monitor |
MODULE AUDIO INPUT | |
CONNECTORS | Female XLR input, male XLR link output, Dante Audio Neutrik® Ethercon |
ANALOGUE INPUT IMPEDANCE | 20 kΩ balanced to ground |
MAXIMUM ANALOGUE INPUT LEVEL | 24.6 Vpp (+21dBu), over voltage protected |
INTERNAL PROCESSING | Multi-channel DSP, programmable via TCP/IP using VU-Net software |
PEQ/shelving filters | |
Up to 48dB/Oct HPF | |
Low latency HF FIR filters | |
Up to 200ms input delay | |
Pre-set selection via rear panel switch | |
NETWORK | |
CONNECTORS | 2x Neutrik ® Ethercon RJ45 |
PROTOCOL | TCP/IP and UDP/IP |
AMPLIFIER | |
TYPE | 2 channel switch-mode, class D |
PEAK OUTPUT POWER | 1300W total 1000W LF, 300W HF |
AVERAGE EFFICIENCY | 89% |
COOLING | External convection cooled, with internal fan |
MAXIMUM AMBIENT TEMPERATURE | 40°C (104°F) for full output |
POWER SUPPLY | |
TYPE | Switch mode, fixed frequency with PFC |
AC INPUT OPERATING RANGE | 85 – 265V ~ AC, 50 - 60Hz |
POWER FACTOR | > 0.98 |
NOMINAL POWER CONSUMPTION | 85W |
MAINS CONNECTOR | Neutrik® Powercon True1 |
MECHANICAL | |
ENCLOSURE | Extensively braced multi-laminate plywood. |
FINISH | Textured black PU coating. |
PROTECTIVE GRILLE | HEX perforated mild steel with protective zinc plating and black powder coat finish. Backed with black grille cloth |
FITTINGS | Top hat for pole mounting |
15 x M8 mounting points | |
Single pocket handle | |
Optional weather protection cowl | |
IP RATING | IP24 factory option available |
DIMENSIONS | (W) 258mm x (H) 428mm x (D) 254mm |
WEIGHT | 14kg (30.8lbs) excluding Transit cover |