489_23584_2
Topthema: Träume werden wahr
Standlautsprecher · ESS AMT-1 D Revival
Für die Älteren unter uns gehören diese Lautsprecher zu den ersten jugendlichen Audiowunschträumen, wie zum Beispiel das Klipschorn oder die Electro Voice Sentry III. Für alle anderen könnte dieser besondere Lautsprecher eine echte Überraschung werden.
>> Mehr erfahren>> Alle anzeigen
487_23559_2
Topthema: Totale Eleganz
Arendal 1528 Monitor 8
Form follows function ist ja ein geflügeltes Wort für Design um die technischen Notwendigkeiten herum. Dass man aber auch beide Aspekte gleichwertig behandeln und auf die Spitze treiben kann, zeigt uns die neue Serie 1528 von Arendal.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Martin Audio CDD-LIVE 12
Ausstattung & technische Daten
| ACOUSTICS | |
| TYPE | Compact, Coaxial Differential Dispersion powered two-way system |
| FREQUENCY RESPONSE | 62Hz – 20kHz ±3dB, -10dB @ 50Hz |
| DRIVERS | LF: 12” (300mm)/2.5” (63.5mm) voice coil, long excursion, shared ferrite motor system with HF |
| HF: 1” (25mm) exit/1.7” (44mm) voice coil, polyimide dome compression driver | |
| INPUT SENSITIVITY | -30dBu for 100dB SPL |
| MAXIMUM SPL | 122dB continuous / 128dB peak |
| DISPERSION | 110˚-60˚ horizontal, 60˚ vertical (user-rotatable) |
| CROSSOVER | 1.5kHz Active LR8 with low latency HF FIR equalisation Balance presets for pole mount/ pole mount with sub/ stage monitor |
| MODULE AUDIO INPUT | |
| CONNECTORS | Female XLR input, male XLR link output, Dante Audio Neutrik® Ethercon |
| ANALOGUE INPUT IMPEDANCE | 20 kΩ balanced to ground |
| MAXIMUM ANALOGUE INPUT LEVEL | 24.6 Vpp (+21dBu), over voltage protected |
| INTERNAL PROCESSING | Multi-channel DSP, programmable via TCP/IP using VU-Net software |
| PEQ/shelving filters | |
| Up to 48dB/Oct HPF | |
| Low latency HF FIR filters | |
| Up to 200ms input delay | |
| Pre-set selection via rear panel switch | |
| NETWORK | |
| CONNECTORS | 2xNeutrik® Ethercon |
| PROTOCOL | TCP/IP and UDP/IP |
| AMPLIFIER | |
| TYPE | 2 channel switch-mode, class D, Bridged Tied Load + 1 channel switch-mode, class D |
| PEAK OUTPUT POWER | 2500W total 2000W LF, 500W HF |
| AVERAGE EFFICIENCY | 89% |
| COOLING | External convection cooled, with internal fan |
| MAXIMUM AMBIENT TEMPERATURE | 40°C (104°F) for full output |
| POWER SUPPLY | |
| TYPE | Switch mode, fixed frequency with PFC |
| AC INPUT OPERATING RANGE | 85 – 265V ~ AC, 50 - 60Hz |
| POWER FACTOR | > 0.98 |
| NOMINAL POWER CONSUMPTION | 160W |
| MAINS CONNECTOR | Neutrik® Powercon True1 |
| MECHANICAL | |
| ENCLOSURE | Extensively braced multi-laminate plywood. |
| FINISH | Textured black PU coating. |
| PROTECTIVE GRILLE | HEX perforated mild steel with protective zinc plating and black powder coat finish. Backed with black grille cloth |
| FITTINGS | Top hat for pole mounting |
| 15 x M8 mounting points | |
| Two side pocket handles | |
| Optional weather protection cowl | |
| IP RATING | IP24 factory option available |
| DIMENSIONS | (W) 359mm x (H) 580mm x (D) 373mm |
| WEIGHT | 28kg (61.6lbs) excluding Transit cover |
