Form follows function ist ja ein geflügeltes Wort für Design um die technischen Notwendigkeiten herum. Dass man aber auch beide Aspekte gleichwertig behandeln und auf die Spitze treiben kann, zeigt uns die neue Serie 1528 von Arendal.
>> Mehr erfahren>> Alle anzeigenMit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigenKategorie: D/A-Wandler
Ausstattungsliste: Teac D-02
Specifications | |
Analog Audio Outputs | |
Terminals | XLR connector (2ch) ×1 RCA connector (2ch) ×1 |
Output impedance | XLR: 100 Ohms RCA: 47 Ohms |
Maximum output level (1 kHz, full-scale, into 10k Ohms) | XLR (set to 0dB): 2.45Vrms RCA:2.45 Vrms |
Frequency response (192kHz PCM signal input) | 5 Hz to 55 kHz (- 3 dB) |
S/N ratio | 115dB |
Total harmonic distortion | 0.0008% (1 kHz) |
Digital Audio Input: XLR | |
Terminals | XLR x 2 (both XLR1 and XLR2 connectors are used for Dual input) |
Input level | 5.0 Vp-p |
Input impedance | 110 Ohms |
Dual connection Input sampling frequencies | 32-384.8 kHz, 16-24 bit Linear PCM (Dual AES format) 32-192 kHz, 16-48 bit Linear PCM (ES-LINK3 format) DSD (ES-LINK1, ES-LINK2 format) |
Single connection Input sampling frequencies | 32-192 kHz, 16-24 bit Linear PCM (AES/EBU format) DSD (ES-LINK1, ES-LINK2 format) |
Digital Audio Input: RCA | |
Terminals | RCA x 2 |
Input level | 0.5 Vp-p |
Input impedance | 75 Ohms |
Input sampling frequencies | 32-192 kHz, 16-24 bit Linear PCM (IEC60958 format) |
Digital Audio Input: Optical digital | |
Terminals | Optical digital x1 |
Input level | 24.0 – .14.5 dBm peak |
Input impedance | 75 Ohms |
Input sampling frequencies | 32-192 kHz, 16-24 bit Linear PCM (IEC60958 format) |
Digital Audio Input: i.LINK (AUDIO) | |
Terminals | i.LINK (AUDIO) x 2 (6-pin, 4-pin) S400 |
Input level | 24.0 – .14.5 dBm peak |
Input sampling frequencies | 32-192 kHz, 16-24 bit, Linear PCM DSD |
Digital Audio Input: USB | |
Terminals | USB port . B x1 |
Input level | 24.0 – .14.5 dBm peak |
Input sampling frequencies | 32-192 kHz, 16-24 bit, Linear PCM |
PLL2 locking range | |
Lockable frequency range | ±5 ppm for each sampling frequency |
Clock Output | |
Connector | BNC x1 |
Output frequency | 44.1, 88.2, 176.4, 48, 96, 192 kHz, 22.5792, 24.576 MHz same frequency as input (when output set to thru) |
Output level | equal to TTL level (into 75 load) |
Output frequency precision | ±0.5 ppm (when shipped new) |
Clock input | |
Connector | BNC ×2 (WORD IN, 10MHz IN) |
Input frequency compatibility | WORD IN: 44.1, 88.2, 176.4, 48, 96, 192 kHz 22.5792, 24.576 MHz (±5 ppm) 10MHz IN: 10 MHz (±5 ppm) |
Input impedance | WORD IN 75 Ohms 10MHz IN 50 Ohms |
Input level | WORD IN equal to TTL level 10MHz IN 0.5.1.0 Vrms sine wave |
General | |
Power supply | AC 230V, 50Hz AC 120V, 60Hz AC 220V, 60Hz |
Power consumption | 14W |
External dimensions (W x H x D, including protrusions) | 445 x 162 x 438 mm (17 1/4″ x 6 3/8″ x 13 1/4″) |
Weight | 27.4 kg (60 2/5 lbs) |
Accessories | |
Included accessories | Power cord set x 1; Felt pads x4; Owner’s manual x 1; Warranty card x 1 |
318-2444
Elektrowelt 24 |