Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenDie hochwertigen Sessel und Sofas von Sofanella sind modern, bezahlbar und schaffen ein gemütliches sowie ein bequemes Heimkinoerlebnis
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Röhrenverstärker
Ausstattungsliste: VAC Signature 200
Technical specification | |
Type | Vacuum tube power amplifier with transformer coupled output |
Features | VAC iQ Continuous Automatic Bias System |
Class A1 triode input & driver stages | |
Direct coupled input & driver stages | |
Low feedback design (6 dB) | |
12 volt trigger | |
Detachable power cord | |
IEC power receptacle | |
Switch Settings | Fully balanced or single-ended input |
Stereo or mono operation | |
Power Output | 100 watts/channel stereo continuous |
200 watts mono continuous | |
Speaker Matching Taps | 1-2 ohms, 2-4 ohms, 4-8 ohms |
Frequency Response | 4 Hz to 85 kHz, +0/-3 dB |
Full Power Bandwidth | 13 Hz to 70 kHz, +0/-3 dB |
Residual Noise | Typically > 95 dB below rated output |
Input Impedance | 200k Ohms, Stereo, Balanced |
100k Ohms, Stereo, Single Ended | |
100k Ohms, mono, Balanced | |
50k Ohms, mono, Single Ended | |
Gain | 30 dB, Stereo, Balanced |
33 dB, Stereo, Single Ended | |
31 dB, Mono, Balanced | |
34 dB, Mono, Single Ended | |
Output Polarity | Non-inverting. |
Balanced input is Pin 2 positive. | |
Tube Complement | 4 x type 6SN7 |
4 x type KT88 | |
Compatible with KT120 | |
Electrically compatible with KT150 (may be too tall to fit under the cage) | |
Operating Voltages | Available factory set for 100, 120, 220, or 230/240 volt operation |
Connectors | Cardas rhodium RCA jacks |
Neutrik XLR jacks | |
Cardas rhodium binding posts | |
Dimensions | 18" W x 17.25" D x 8.75" H |
457 mm x 438 mm x 222 mm | |
Excluding knobs & connectors | |
Weight | 100 lbs. |
45.5 kg |