Topthema: Ingenieurskunst in Perfektion Revelation RX2 PRO – High-End Zweikanalendstufe von Brax

Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.

>> Mehr erfahren >> Alle anzeigen

502_23688_2

Topthema: Himmlisches Team Dynaudio Contour 20i, MOON Audio 250i V2

Unser Hobby spiegelt die Welt da draußen wider: immer mehr, immer größer, immer teurer muss es sein. Zum Glück gibt es aber auch Gegenbeispiele. Mit dem dänischkanadischen Traumduo kann man seinen irdischen Musikfrieden finden.

>> Mehr erfahren >> Alle anzeigen

Kategorie: Tonabnehmer

Ausstattungsliste: van den Hul CONDOR XGP-HO & XGM-HO

Ausstattung & technische Daten

Specification
XG-HO Version	(X = cross shaped modulator, G = matched crystal Gold wire coils, HO = High Output)
- High output, most suitable for jazz and pop music
- Output voltage: 0.45 mV/channel
- Types available: XGP-HO and XGM-HO (P and M type suffix)
Stylus Replacement Available	Stylus replacement and other services available on request
Stylus Shape	VDH - IS
Stylus Radii	2 x 85 Micron
Frequency Range	5 - 55.000 Hz
Tracking Force	13.5 - 15 mN. Versions optimized for lower or higher tracking forces (allowing very light or very heavy arms) can be built on special request. These have a higher, respectively lower static compliance.
Static Compliance	35 Micron/mN. Versions optimized for lower or higher tracking forces (allowing very light or very heavy arms) can be built on special request. These have a higher, respectively lower static compliance.
Tracking Ability at 15mN at 315Hz	70 - 80 Micron
Output Voltage at 1 kHz at 5.7 cm/s eff.	0.45 mV RMS
Channel Unbalance	< 0.3 dB
Channel Separation at 1kHz / 10kHz	> 36 / > 30 dB
Equivalent Stylus Tip Mass	0.32 Milligram
System Weight	P and M type suffix: Each of the above mentioned versions of The CONDOR are available with either:
- A regular carbon-nylon plastic body. Total cartridge weight is 8.75 gram. Suitable for arms with an effective tone arm mass of 12 gram to 20 gram. The plastic bodied version carries the -P suffix in its name.
- A metal body. Total cartridge weight is 9.25 gram. Suitable for arms with an effective tone arm mass of 12 gram to 20 gram. The metal bodied version carries the -M suffix in its name.
Vertical Tracking Angle	22 Degrees
Optimum Load Capacitance	Non critical
Recommended Load Impedance	1000 (500 - 47k) Ohm
Recommended Eff Tone arm Mass	Versions optimized for lower or higher tracking forces (allowing very light or very heavy arms) can be built on special request. These have a higher, respectively lower static compliance.
P and M type suffix: Each of the above mentioned versions of The CONDOR are available with either:
- A regular carbon-nylon plastic body. Total cartridge weight is 8.75 gram. Suitable for arms with an effective tone arm mass of 12 gram to 20 gram. The plastic bodied version carries the -P suffix in its name.
- A metal body. Total cartridge weight is 9.25 gram. Suitable for arms with an effective tone arm mass of 12 gram to 20 gram. The metal bodied version carries the -M suffix in its name.
The cartridge has been optimized regarding an EFFECTIVE tone arm mass of 12 - 20 gram. Heavier arms CAN produce tracking and resonance problems and arms with an effective mass exceeding 24 gram WILL CERTAINLY!
Moving Coil Resistance per channel	62 Ohm +/- 10%