491_17256_1
Anzeige
Topthema: Die Rückkehr einer Ikone
Revox B77 MK III
Revox präsentiert die neue Revox B77 MK III und zugleich seine neue, eigene Revox Analog Master Tapes Collection. Beides gefertigt im Revox KLANGWERK in Villingen für ein perfektes Zusammenspiel.
>> Mehr erfahren>> Alle anzeigen
487_23559_2
Topthema: Totale Eleganz
Arendal 1528 Monitor 8
Form follows function ist ja ein geflügeltes Wort für Design um die technischen Notwendigkeiten herum. Dass man aber auch beide Aspekte gleichwertig behandeln und auf die Spitze treiben kann, zeigt uns die neue Serie 1528 von Arendal.
>> Mehr erfahren>> Alle anzeigenKategorie: Tonabnehmer
Ausstattungsliste: van den Hul CONDOR XCP-LO & XCM-LO
Ausstattung & technische Daten
| Specification | |
| XC-LO Version | (X = cross shaped modulator, C = matched crystal Copper wire coils, LO = Low Output) |
| - Low output all-round model | |
| - Output voltage: 0.25 mV/channel | |
| - Types available: XCP-LO and XCM-LO (P and M type suffix) | |
| Stylus Replacement Available | Stylus replacement and other services available on request |
| Stylus Shape | VDH - IS |
| Stylus Radii | 2 x 85 Micron |
| Frequency Range | 5 - 55.000 Hz |
| Tracking Force | 13.5 - 15 mN. Versions optimized for lower or higher tracking forces (allowing very light or very heavy arms) can be built on special request. These have a higher, respectively lower static compliance. |
| Static Compliance | 35 Micron/mN. Versions optimized for lower or higher tracking forces (allowing very light or very heavy arms) can be built on special request. These have a higher, respectively lower static compliance. |
| Tracking Ability at 15mN at 315Hz | 70 - 80 Micron |
| Output Voltage at 1 kHz at 5.7 cm/s eff. | 0.25 mV RMS |
| Channel Unbalance | < 0.3 dB |
| Channel Separation at 1kHz / 10kHz | > 36 / > 30 dB |
| Equivalent Stylus Tip Mass | 0.32 Milligram |
| System Weight | P and M type suffix: Each of the above mentioned versions of The CONDOR are available with either: |
| - A regular carbon-nylon plastic body. Total cartridge weight is 8.75 gram. Suitable for arms with an effective tone arm mass of 12 gram to 20 gram. The plastic bodied version carries the -P suffix in its name. | |
| - A metal body. Total cartridge weight is 9.25 gram. Suitable for arms with an effective tone arm mass of 12 gram to 20 gram. The metal bodied version carries the -M suffix in its name. | |
| Vertical Tracking Angle | 22 Degrees |
| Optimum Load Capacitance | Non critical |
| Recommended Load Impedance | 500 (> 200) Ohm |
| Recommended Eff Tone arm Mass | Versions optimized for lower or higher tracking forces (allowing very light or very heavy arms) can be built on special request. These have a higher, respectively lower static compliance. |
| P and M type suffix: Each of the above mentioned versions of The CONDOR are available with either: | |
| - A regular carbon-nylon plastic body. Total cartridge weight is 8.75 gram. Suitable for arms with an effective tone arm mass of 12 gram to 20 gram. The plastic bodied version carries the -P suffix in its name. | |
| - A metal body. Total cartridge weight is 9.25 gram. Suitable for arms with an effective tone arm mass of 12 gram to 20 gram. The metal bodied version carries the -M suffix in its name. | |
| The cartridge has been optimized regarding an EFFECTIVE tone arm mass of 12 - 20 gram. Heavier arms CAN produce tracking and resonance problems and arms with an effective mass exceeding 24 gram WILL CERTAINLY! | |
| Moving Coil Resistance per channel | 21 Ohm +/- 10% |
Top Händler
|
262-2322
hifisound Lautsprechervertrieb |
