Die 800er Serie von Philips ist preislich deutlich unter den edlen OLED+ Modellen angesiedelt und erfreut sich daher hoher Beliebtheit. Dennoch bringt das brandneue 2025er Modell OLED810 einen Großteil der Technologie aus der Topserie mit.
>> Mehr erfahren>> Alle anzeigen
Die Q65H ist die günstigste Soundbar aus TCLs Q-Serie. Sie ist bereits unter 300 Euro erhältlich und leistet dafür erstaunliches.
>> Mehr erfahren>> Alle anzeigenKategorie: Tonabnehmer
Ausstattungsliste: van den Hul COLIBRI XCP-HO & XCM-HO
| Specification | |
| XC-HO Version | (X = cross shaped modulator, C = matched crystal Copper wire coils, HO = High Output) |
| - High output, most suitable for jazz music | |
| - Output voltage: 0.30mV/channel | |
| - Types available: XCP-HO and XCM-HO (P and M type suffix ) | |
| Stylus Replacement Available | Stylus replacement and other services available on request |
| Stylus Shape | VDH - IS |
| Stylus Radii | 2 x 85 Micron |
| Frequency Range | 5 - 65.000 Hz |
| Tracking Force | 13.5 - 15 mN. Versions optimized for lower tracking forces (allowing very light arms) can be built on special request. These have a higher static compliance. |
| Static Compliance | 35 Micron/mN. Versions optimized for lower tracking forces (allowing very light arms) can be built on special request. These have a higher static compliance. |
| Tracking Ability at 15mN at 315Hz | 70 Micron |
| Output Voltage at 1 kHz at 5.7 cm/s eff. | 0.30 mV RMS |
| Channel Unbalance | < 0.5 dB |
| Channel Separation at 1kHz / 10kHz | > 35 / > 30 dB |
| Equivalent Stylus Tip Mass | 0.24 Milligram |
| System Weight | 8.2 Gram |
| P and M type suffix: Each of the three above mentioned main versions of The COLIBRI are available with either: - A regular carbon-nylon plastic body. Total cartridge weight is 6 gram. Suitable for arms with an effective tone arm mass of 8 gram to 14 gram. | |
| - A metal body. Total cartridge weight is 7 gram. Suitable for arms with an effective tone arm mass of 10 gram to 14 gram. The metal bodied version carries the -M suffix in its name. | |
| Vertical Tracking Angle | 22 Degrees |
| Optimum Load Capacitance | Non critical |
| Recommended Load Impedance | 500 - 1000 Ohm |
| Recommended Eff Tone arm Mass | Versions optimized for lower tracking forces (allowing very light arms) can be built on special request. These have a higher static compliance. |
| P and M type suffix: Each of the three above mentioned main versions of The COLIBRI are available with either: - A regular carbon-nylon plastic body. Total cartridge weight is 6 gram. Suitable for arms with an effective tone arm mass of 8 gram to 14 gram. | |
| - A metal body. Total cartridge weight is 7 gram. Suitable for arms with an effective tone arm mass of 10 gram to 14 gram. The metal bodied version carries the -M suffix in its name. | |
| The cartridge has been optimized regarding an EFFECTIVE tone arm mass of 11 - 12 gram. Heavier arms CAN produce tracking and resonance problems and arms with an effective mass exceeding 16 gram WILL CERTAINLY! | |
| Please note that an extremely short cantilever and a high tracking ability and heavy arms DUE TO PHYSICS will never yield a happy marriage. | |
| Moving Coil Resistance per channel | 96 Ohm +/- 10% |



