488_23522_2
Topthema: Ingenieurskunst in Perfektion
Revelation RX2 PRO – High-End Zweikanalendstufe von Brax
Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigen
487_23559_2
Topthema: Totale Eleganz
Arendal 1528 Monitor 8
Form follows function ist ja ein geflügeltes Wort für Design um die technischen Notwendigkeiten herum. Dass man aber auch beide Aspekte gleichwertig behandeln und auf die Spitze treiben kann, zeigt uns die neue Serie 1528 von Arendal.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Tannoy VXNET 12HP
Ausstattung & technische Daten
| Performance | |
| System Type | Full Range - Vented |
| Frequency Response (-3 dB) (1) | 70 Hz - 25 kHz |
| Frequency Range (-10 dB) (1) | 60 Hz - 30 kHz |
| Rated Maximum SPL (2) | Average: 124 dB |
| Peak: 130 dB | |
| Dispersion (-6 dB) | 75 degrees conical |
| Driver Complement | 1 x 300 mm (12") PowerDual |
| Crossover (DSP Generated) | 1.5 kHz and variable high pass filter for use with subwoofers |
| Directivity Factor (Q) | 10.1 averaged 1 kHz to 10 kHz |
| Directivity Index (DI) | 10.0 averaged 1 kHz to 10 kHz |
| Distortion | |
| 10% Full Power (16.7 V) | 2nd Harmonic 250 Hz: 0.24%, 1 kHz: 1.58%, 10 kHz: 5.20% |
| 3rd Harmonic 250 Hz: 0.67%, 1 kHz: 3.54%, 10 kHz: 0.19% | |
| 1% Full Power (5.3 V) | 2nd Harmonic 250 Hz: 0.11%, 1 kHz: 0.79%, 10 kHz: 1.94% |
| 3rd Harmonic 250 Hz: 0.58%, 1 kHz: 2.53%, 10 kHz: 0.16% | |
| Electronics | |
| Efficiency | >85% typically |
| Damping Factor | 120 ref 8 Ohms |
| Distortion | <0.05% @ 1 kHz - 3 dB output (22 kHz bandwidth) |
| Input Impedance | 5.6 kOhms (unbalanced) |
| 11.2 kOhms (balanced) | |
| Input Sensitivity | 1.4 V (+5.5 dBu) |
| System Type | Dual channel Class D (Bridged) |
| PSU Specifications | |
| Mains fuse | External |
| Input Connector | Locking Neutrik Powercon |
| Voltage Selection | Automatic (115 / 230 V, 45 - 65 Hz) |
| System Type | High current, high frequency switch mode |
| Efficiency | >90% typical |
| Input voltage | 100 V / 115 V / 230 V nominal +/-10% |
| Mains fuse | External |
| Fuse type | T10AT |
| Other features | Automatic soft start |
| DSP System | |
| Comms Facilities | Firmware updatable and selected parameters editable |
| Communications | Serial - RS485 Proprietary message format |
| Dynamic Range | 112 dB (A) typical |
| DSP | 3rd generation SHARC |
| Sampling Frequency | 96 kHz 24 bit A/S-D/A word length |
| Format | 1 IN - 2 OUT |
| Construction | |
| Enclosure | 36.4 litre, 15 mm (enclosure) and 18 mm (front) birch plywood, vented and internally braced |
| Finish | Textured black or white paint (custom colours on request) Powder coated perforated steel grille Airnet cloth behind |
| Connectors | 1 x female XLR (input) 1 x male XLR (link) 1 x RJ45 (network in) 1 x RJ45 (network link) 1 x Neutrik Powercon |
| Controls & Indicators | LED on front of cabinet behind grille (wink indicator for locating & assigning) Power LED (blue) Signal LED (green) Limit LED (red) User DSP - defeat switch Power switch |
| Dimensions (H x W x D) | 486 x 370 x 360 mm |
| Weight | 23.5 kg |
Top Händler
|
305-2128
MD Sound GmbH & Co. KG |
