390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigen
489_23584_2
Topthema: Träume werden wahr
Standlautsprecher · ESS AMT-1 D Revival
Für die Älteren unter uns gehören diese Lautsprecher zu den ersten jugendlichen Audiowunschträumen, wie zum Beispiel das Klipschorn oder die Electro Voice Sentry III. Für alle anderen könnte dieser besondere Lautsprecher eine echte Überraschung werden.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Quested Monitoring Systems S6R
Ausstattung & technische Daten
| TECHNICAL SPECIFICATION | |
| Dimensions | 170(w) x 285(h) x 240(d) mm |
| Weight | 7.5 kg / 15.5 lb |
| Drivers | Bass cone – 1 x 130 mm (5 ”) |
| High Frequency | Soft dome – 1 x 28 mm (1 ⅛”) |
| Maximum SPL | 100 dB continuous pink noise @ 1m. Leq, 1 minuet, single unit. 106 dB continuous pink noise @ 1m. Leq, 1 minuet per pair |
| Frequency Response | 80 Hz-20 kHz ± 2 dB / 67 Hz-22kHz -6 dB |
| Connector | XLR and ¼ inch Jack combo socket |
| Impedance | 10k electronically balanced with RF filters |
| Wiring | Pin 1 ground Sleeve |
| Pin 2 hot Tip | |
| Pin 3 cold Ring | |
| Sensitivity | -12 dBu to +6 dBu for 96 dB SPL @ 1 m set by 10 position rotary switch on rear |
| Subsonic | -3dB @ 45 Hz, 24dB/oct |
| Ultrasonic | -3dB @ 75kHz, 4dB/oct |
| Crossover | 1k19 |
| LF EQ | -2/- 4 @ 82 Hz |
| HF EQ | +/- 2dB @ 10 kHz |
| POWER AMPLIFIER | |
| LF output power | 65W RMS continuous (note 1) |
| HF output power | 45W RMS continuous (note 1) |
| THD | 0.03% at levels up to 1 dB below clip, 20 Hz-20 kHz. Typ 0.005% @ 1kHz. |
| Hum & Noise | > -100 dB referred to clip |
| Note | The continuous rating is for a period not exceeding 5 minutes with unrestricted airflow (100 mm clearance) around the amplifier heatsinks and an ambient temperature not exceeding 30 Degrees C. |
| INDICATORS | |
| Power on | Front mounted green LED indicates power applied. |
| Clip | Red LED 2 dB before amplifier clip. |
| POWER REQUIREMENTS | |
| Voltage | Set by internal plugs: nominal 115V or 230V @ 50-60 Hz AC 230V setting: min 160V; restricted output power: max 255V 115V setting: min 80V; restricted output power: max 127V |
| CONSUMPTION | |
| Quiescent | 12W |
| Typical use | 45W (average music) |
| Max | 90W (average music) |
| Note | 0 dBu = 775 mV into open circuit |
