488_23522_2
Topthema: Ingenieurskunst in Perfektion
Revelation RX2 PRO – High-End Zweikanalendstufe von Brax
Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigen
490_0_3
Anzeige
Topthema: Kinofeeling für Zuhause
Genießen Sie höchsten Komfort mit Kinosofas von Sofanella
Die hochwertigen Sessel und Sofas von Sofanella sind modern, bezahlbar und schaffen ein gemütliches sowie ein bequemes Heimkinoerlebnis
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Focusrite RedNet R1
Ausstattung & technische Daten
| Specification | |
| Type | Desktop Remote Controller |
| Internal Talkback | |
| Note | All measurements taken at maximum gain unless otherwise stated, Rs = 150Ω |
| Gain Range | 0dB to 55dB |
| Type | Electronically Balanced, Zin = 3kΩ |
| Max. Input Level | +10dBu ± 0.5dB |
| External Talkback | |
| Note | All measurements taken at maximum gain unless otherwise stated, Rs = 150Ω |
| Gain Range | 0dB to 55dB |
| Max. Input Level | +10dBu ± 0.5dB |
| Frequency Response | 20Hz - 20kHz ± 2dB |
| THD + N | Less than -98dB (0.0012%) @ -1dBFS |
| EIN | Less than -128dBu |
| Signal-to-Noise Ratio | -111dB |
| Common-Mode Rejection Ratio | 50/60Hz CMRR: <-77dB |
| Type | Electronically Balanced, Zin = 3kΩ |
| Maximaler Eingangspegel | +26 dBU ±0.5 dB |
| Gain-Bereich | 57dB |
| Headphone Output | |
| Note | All measurements taken at +19dBm reference level, maximum gain, RL = 600Ω |
| 0 dBFS Reference Levels | +11dBm |
| Frequency Response | 20Hz to 20kHz ±0.5dB |
| THD + N | -100dB (0.001%) @ -1dBFS, Rs = 150R |
| Dynamic Range | 108dB A-weighted (typical), 20Hz - 20kHz |
| Noise in Presence of Signal (NiPoS) | Greater than -97 dBu |
| Output Impedance | 5Ω |
| Headphone Impedance | 32Ω - 600Ω |
| Microphone/ Line Crosstalk | |
| Mic Input to Headphone Output | Less than -122dB; 20Hz - 20kHz (all other channels at 0dBFS) |
| Headphone Output to Mic Input | Less than -84dB; 20Hz - 20kHz (all other channels at 0dBFS) |
| Headphone Crosstalk | |
| Left to Right | Less than -85dB; 20Hz - 20kHz (all other channels at 0dBFS) |
| Right to Left | Less than -85dB; 20Hz - 20kHz (all other channels at 0dBFS) |
| Digital Performance | |
| Supported Sample Rates | 44.1 / 48 / 88.2 / 96 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit |
| Clock Sources | Internal or from Dante Network Master |
| Rear Panel Connectivity, Pots & Switches | |
| External Talkback Mic Input | 1 x XLR (F) |
| Foot Switch | 1 x 1/4" stereo jack |
| Outputs | |
| Headphone Outputs | 1 x 1/4" stereo jack |
| Pots & Switches | |
| Power Switch | 1 x Switch |
| Gain Pot | 1x Pot |
| Talkback Switch | 1 x Tri-State Switch (External Talkback + 48V, External Talkback and Internal Talkback) |
| PSU & Network Connections | |
| PSU (PoE and DC) | 1 x PoE Input and 1 x DC 12V Locking Barrel Input Connector |
| Network | 1 x Standard RJ45 connector |
| Top Panel Indicators | |
| LCD Screens | 2 x Screens (Control, Status, Metering & Menus) |
| Control Functions | 2 x Continuous Pot (Level & Dim). 1 x Pot (Headphone Output). 24 x Multi-Function Switches (Sources, Talkback, Monitor Outputs & Menu Items). 12 x Single-Function Switches (Headphones, Sum, Spill, Mode, Mute, Solo, Outputs, A/B, Cut x 2, Dim & Output Lock) |
| Power | |
| Power over Ethernet (PoE) | Complies with IEEE 802.3af class 0 Power-over-Ethernet standard (PoE A or PoE B compatible) |
| DC Power Supply | 1 x 12V 1.2A DC Power Supply |
| Power Consumption | PoE: 10.3W - DC: 9W (When using supplied DC PSU) |
| Heat Performance | |
| Operating Temperature | Operates at up to an ambient temperature of 40 degrees Celsius |
