
Für die Älteren unter uns gehören diese Lautsprecher zu den ersten jugendlichen Audiowunschträumen, wie zum Beispiel das Klipschorn oder die Electro Voice Sentry III. Für alle anderen könnte dieser besondere Lautsprecher eine echte Überraschung werden.
>> Mehr erfahren>> Alle anzeigen
Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: CODA Audio AiRAY
Specification | |
Type | 3-way bi-amplified line array module |
Frequency response | 50 Hz – 22 kHz (-6 dB) |
Power handling AES / peak (passive) | Bi-amplified only |
Low AES / peak | 2000 W / 8000 W |
Mid / High AES / peak | 300 W / 2600 W |
Sensitivity low 1W / 1m | 103 dB |
Sensitivity mid / high 1W / 1m | 114 dB |
Maximum peak SPL (with LINUS10) | Low: 143 dB |
Mid / High: 148 dB | |
Amplification, Cabinets per Amplifier | LINUS14D Optimum / Maximum: 4/6 |
LINUS10 Optimum / Maximum: 2/3 | |
Dispersion horizontal | 90°, 120° or asymmetrical 105° |
Dispersion vertical | Array dependent: 0°, 0.5°, 1°, 2°, 2.5°, 3° to 8° in 1°-steps |
Low frequency | 2x 12″ neodymium, water resistant cones, 4″ (101.6 mm) voice coil, 1000 W (AES) each |
Mid/High frequency | 2x 6″ DDP (Double Diaphragm Planar-wave-drivers) |
Mid: 3.5″ (90 mm) voice coil, 150 W (AES) each | |
High: 1.75″ (44.4 mm) voice coil, 80 W (AES) each | |
Crossover point | 400 Hz bi-amp, 6300 Hz passive |
Input connectors | 2x Neutrik™: 1x Input + 1x Link Cable |
Nominal impedance LF / MF+HF | 8 Ohm (1+/1-) / 16 Ohm (2+/2-) |
Enclosure material | Birch plywood |
Finish | Polyurea coating (water resistant) |
Flying hardware | Integrated |
Dimensions (W x H x D) | 674 x 356 x 555 mm / 26.54 x 14.02 x 21.85″ (674 x 400 x 555 mm / 26.54 x 15.75 x 21.85″ incl. hardware) |
Net weight | 40 kg / 88.18 lbs |