486_23403_2
Topthema: Der größte QD-Mini-LED-TV
TCL 115X955 MAX
Der TCL 115X955 MAX trägt die Namenserweiterung MAX völlig zurecht: Mit einer Diagonalen von 115 Zoll (292 cm) ist er nicht weniger als der derzeit größte QD-Mini-LED-TV.
>> Mehr erfahren>> Alle anzeigen
483_17159_1
Anzeige
Topthema: HÖRTEST2024
Frankfurter HiFi-Tage
Die Frankfurter HiFi-Tage sind DIE Gelegenheit für einen ausgiebigen HÖRTEST. Nach über 20 Jahren treffen sich Musik- und HiFi-Fans wieder in Frankfurt, um sich einen Überblick über die neusten und angesagtesten Technologien zur hochwertigen Musikwiedergabe zu verschaffen.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Stereo
Ausstattungsliste: Russell K RED 150
Ausstattung & technische Daten
| Cabinet | |
| Dimensions H- 950mm (1000mm including plinth, base and spikes) W-240mm D-250mm | |
| Construction 16mm MDF all sides apart from front baffle which is 19mm. | |
| Totally undamped cabinet | |
| 3 acoustic loading bracing shelves with multiple apertures, mounted below the tweeter, below the bass mid driver and below the sub bass driver | |
| 1 bracing shelf mounted near the bottom of the enclosure containing an internal port | |
| Internal port vents into a small chamber containing 2 asymmetric length reflex ports tuned as a system to 21Hz | |
| Drive units | |
| 2 x 6.5” Bass units with impregnated paper cone and curved optimised acoustic profile | |
| High power Ferrite magnet driving a 25mm voice coil with aluminium former and Faraday distortion cancelling copper ring | |
| 25mm soft dome tweeter | |
| Double Ferrite magnet system | |
| Copper Clad Aluminium voice coil wire on a Fibreglass Former and Faraday distortion cancelling copper ring | |
| Crossover | |
| All drivers connected in positive phase | |
| Sub bass driver starts roll off at 80Hz 6db/Oct fed by “Enclosed Field Iron Core Inductor”. Features high power without saturation, very low DCR and almost no stray magnetic field | |
| Bass/Mid driver crossover frequency 2200Hz nominal 12 db/Oct. Utilises an “Enclosed Field Ferrite Core Inductor “in the signal path. Very low DCR nominal stray fields | |
| Tweeter attenuation by misaligned Zobel network as opposed to conventional L-Pad | |
| All Drivers have only one component in the signal path | |
| Phase optimised through the crossover region | |
| In room usable frequency response 20Hz-22KHz (dependent on room) | |
| Sensitivity: 87db 1 watt 1 Metre | |
