Form follows function ist ja ein geflügeltes Wort für Design um die technischen Notwendigkeiten herum. Dass man aber auch beide Aspekte gleichwertig behandeln und auf die Spitze treiben kann, zeigt uns die neue Serie 1528 von Arendal.
>> Mehr erfahren>> Alle anzeigenMit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigenKategorie: Car Hifi Endstufe 4-Kanal
Ausstattungsliste: DLS Performance CA41
Specifications | |
Number of channels | 4 |
Amplifier class | AB |
Mono bridge mode 4 ohm | 2 x 200 W RMS |
Output power in 2 ohm | 4 x 125 W RMS |
Output power in 4 ohm | 4 x 70 W RMS |
Damping factor | >100 |
S/N ratio, A-weighted | >100 dB |
Frequency range | 10 Hz - 35 kHz |
Input sensitivity | 0,25 - 5 V |
Input impedance | >10 kohm |
Input impedance, high level | 100 ohm |
Filters channel A & B | HP: 15-500 Hz. LP: 50-500 Hz / 0,5 - 5 kHz (x10) |
Grand bass filter | 0-18 dB @ 25-80 Hz |
Remote bass level control | No |
Remote phase shift control | No |
Low level output | Yes |
High level input with auto start | Yes |
Power consumption (idle) | 0,7 A |
Power consumption (max) | 60 A |
Rec. power cable | Minimum 4AWG / 21 mm2 |
Fuses | 2 x 30 A |
Dimension (W x D x H) | 250 x 354 x 67 mm / 9,84 x 13,93 x 2,63" |
Weight | 4,2 kg ( 9,3 lb) |
323-2520
Masori |