Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenMit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Phono Vorverstärker
Ausstattungsliste: Audio Research Reference Phono 10
TECHNICAL SPECIFICATION | |
FREQUENCY RESPONSE | ± .2dB of RIAA, 10Hz to 60kHz; 3dB points below 0.3Hz and above 300kHz. |
DISTORTION | Less than .002% at 1.0V RMS 1kHz output. |
GAIN | Selectable 51dB (Low), 74dB (High) at1kHz BAL; 45dB (Low), 68dB (High) at1kHz SE. (MC & MM compatible). |
BUTTONS | Front (2) Power, Mute. |
INPUT IMPEDANCE | 47K ohms and 100pF SE. Selectable loads 1000, 500, 200, 100, 50 ohms and Custom. |
PHONO EQUALIZATION | (Selectable) RIAA, Columbia, Decca. OUTPUT POLARITY Non inverting. |
OUTPUT IMPEDANCE | 200 ohms SE, 400 ohms balanced. Recommended load 50K-100K ohms and 100pF. (10K ohms minimum and 2000pF maximum). |
MAXIMUM INPUT | 250mV RMS at 1kHz (680 mV RMS at10kHz). |
RATED OUTPUTS | 0.5V RMS 10Hz to 20kHz, 100K ohm load (output capability is 80V RMS BAL output at 1/2% THD at1kHz, 40V SE). |
POWER SUPPLIES | Electronically regulated low and high voltage supplies. Automatic 40 sec. warm-up/brown-out mute. Line regulation better than .01%. |
NOISE | 0.22uV equivalent input noise, IHF weighted, shorted(Low Gain) input (73 dB below 1mV 1kHz input). 0.055uV equivalent input noise (High Gain) (65dB below 0.1mV 1kHz input). |
TUBE COMPLEMENT | (8)-6H30P dual triodes, plus (2 each) 6550C and 6H30P in power supply. |
POWER REQUIREMENTS | 100-135VAC 60Hz (200-270VAC 50/60Hz) 235 watts maximum. Standby 0.8 watts. |
DIMENSIONS | Width 19” (48 cm); Height 7” (17.8 cm) (standard rack panel). |
141-589
Sound @ Home |