Unser Hobby spiegelt die Welt da draußen wider: immer mehr, immer größer, immer teurer muss es sein. Zum Glück gibt es aber auch Gegenbeispiele. Mit dem dänischkanadischen Traumduo kann man seinen irdischen Musikfrieden finden.
>> Mehr erfahren>> Alle anzeigenMit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigenKategorie: Raumprozessoren
Ausstattungsliste: Crestron HD-XSPA
Audio – General | |
Features | 11 selectable source inputs plus built-in noise generator, 7.1 Dolby Digital®/DTS® surround sound decoder, 7.1 multi-channel signal processing and steering, 9-band graphic or parametric EQ, 120 ms lip-sync delay, |
20 ms speaker delay, unprocessed "Direct" mode, stereo or mono downmix output, HDCP management, Crestron QuickSwitch HD, 8-channel power amplifier, amplifier and speaker protection, speaker profiles | |
Input Signal Types | DigitalMedia 8G+ & HDBaseT, HDMI (Dual-Mode DisplayPort compatible [4]), S/PDIF (coaxial and optical), analog 2-channel (unbalanced and balanced) |
Output Signal Types | Amplified 7.1 channel, line-level 2-channel downmix and subwoofer, HDMI pass-through or 2-channel downmix |
Analog-To-Digital Conversion | 24-bit 96 kHz |
Digital-To-Analog Conversion | 24-bit 96 kHz (192 kHz in Direct mode) |
Audio Performance – Amplified Outputs | |
Output Power | 140 Watts per channel at 8 Ohms; 240 Watts per channel at 4 Ohms |
Damping Factor | >200 @ 20 Hz |
Amplifier Monitoring | Over Current, Over/Under Voltage, Over Temperature, DC Offset, Clipping |
Frequency Response | 20 Hz to 20 kHz ±0.5 dB |
THD+N @ 8 Ohms | <0.008% digital in, <0.01% balanced in, <0.02% unbalanced in (at 1 kHz) |
THD+N @ 4 Ohms | <0.02% any input (at 1 kHz) |
S/N Ratio | >102 dB digital in, >100 dB analog in (A-Weighted at full output) |
Audio Performance – Downmix Preamp Output | |
Frequency Response | 20 Hz to 20 kHz ±0.5 dB |
THD+N | <0.003% digital in, <0.005% analog in (at 1 kHz) |
S/N Ratio | >106 dB digital in, >102 dB analog in (A-Weighted at full output) |
Audio Settings – Surround Sound | |
Decoding Modes | None, Stereo, Multi-Channel Stereo (Party), Dolby Pro Logic IIx Movie, Dolby Pro Logic IIx Music, DTS Neo:6 Cinema, DTS Neo:6 Music, Two Channel Steering – Surround, Two Channel Steering – Rear, Multi-Channel Stereo (Party), |
Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-ES Matrix, DTS-ES Discrete, DTS 96/24, DTS-HD Master Audio, PCM Multi-Channel | |
DTS Neo:6 Music Settings | Center Gain 0.0 to 1.0, Standard or Wide mode |
Dolby Pro Logic IIx Music Settings | Dimension ±3, Center Width 0 to 7, Standard or Panorama |
Speaker Trims | ±12 dB per output (Front L/R, Surround L/R, Back L/R, Center, Sub) |
Speaker Delay | 0.0 to 20.0 ms per output |
Crossover Frequency | Large (full range), 40, 50, 60, 70, 80, 90, 100, 120, 150, or 200 Hz per output (excluding sub) |
Speaker Protection | Output limiting configurable 5 to 140 Watts @ 8 Ohms, 5 to 240 Watts @ 4 Ohms, per output |
Low Frequency Effects (LFE) | -10.0 to 0.0 dB |
EQ Modes | 9-band graphic (per output) or 9-band parametric (per output) |
GEQ Center Frequencies | 3, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz |
GEQ Gain | ±12.0 dB per band |
PEQ Center Frequency | 10 to 20,000 Hz per band |
PEQ Gain | ±12.0 dB per band |
PEQ Bandwidth | 0.1 to 3.5 octaves per band |
Main Volume Level | -80 to +20 dB plus mute |
Bass Control | ±12.0 dB |
Treble Control | ±12.0 dB |
Loudness Compensation | on/off |
Compression | none, Crestron DRC (Heavy, Medium, Light), Bitstream DRC (Heavy, Medium, Light), Dolby TrueHD Auto |
Speaker Profiles | Save and load custom or pre-calibrated profiles comprising EQ and Speaker Protection settings |
Audio Settings – Downmix | |
Downmix Volume Level | -80 to +20 dB plus mute |
Bass Control | ±12.0 dB |
Treble Control | ±12.0 dB |
Loudness Compensation | on/off |
Balance | ±50% |
Summing | Stereo or mono selectable |
Delay | 0.0 to 85.0 ms |
Audio Settings – Inputs | |
Input Compensation | ±10.0 dB per input |
Lip-Sync Delay | 0.0 to 120.0 ms per input |
Video | |
Features | HDCP management, resolution management, Crestron QuickSwitch HD |
Input Signal Types | Types HDMI w/Deep Color, 3D, & 4K (DVI & Dual-Mode DisplayPort compatible [4]); DM 8G+ & HDBaseT w/Deep Color, 3D, & 4K |
Output Signal Types | HDMI w/Deep Color, 3D, & 4K |
Communications | |
Ethernet | For control & setup; 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP |
USB | USB client for setup via front panel COMPUTER port; supports signal extension of USB HID class devices over DM via rear panel USB host port, expandable to support virtually any USB 1.1 or 2.0 device using Crestron USB-EXT-DM USB over Ethernet Extenders |
RS-232 | 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking (via control system) |
IR/Serial | 1-way device control via infrared up to 1.1 MHz or serial TTL/RS-232 (0-5 Volts) up to 19.2k baud (via control system) |
DigitalMedia | DM 8G+, HDCP, EDID, CEC, Ethernet |
HDBaseT | HDCP, EDID, Ethernet |
HDMI | HDCP, EDID, CEC |
Power | |
Main Power (US/North America) | 6 Amps @ 120 Volts AC, 50/60 Hz |
Main Power (International) | 3 Amps @ 220-240 Volts AC, 50/60 Hz |
Power Consumption | 53 Watts @ idle, power switch on, all amplifier channels off; 30 Watts @ idle, power switch off |
Environmental | |
Temperature | 41° to 104° F (5° to 40° C) |
Humidity | 10% to 90% RH (non-condensing) |
Heat Dissipation | 300 BTU/hr (140W@8Ω); 425 BTU/hr (240W@4Ω) |
Enclosure | |
Chassis | Metal with black finish, vented sides, ultra-quiet variable-speed fan-cooled |
Front Panel | Metal with black finish and polycarbonate label overlay |
Mounting | Freestanding or 2 RU 19-inch rack-mountable (includes removable feet and rack ears) Dimensions |
Dimensions | |
Height | 4.07 in (104 mm); 3.47 in (89 mm) without feet |
Width | 19.0 in (483 mm); 17.28 in (439 mm) without rack ears |
Depth | 15.78 in (401 mm) |
Weight | 32 lb (15 kg) |