502_23688_2
Topthema: Himmlisches Team
Dynaudio Contour 20i, MOON Audio 250i V2
Unser Hobby spiegelt die Welt da draußen wider: immer mehr, immer größer, immer teurer muss es sein. Zum Glück gibt es aber auch Gegenbeispiele. Mit dem dänischkanadischen Traumduo kann man seinen irdischen Musikfrieden finden.
>> Mehr erfahren>> Alle anzeigen
489_23584_2
Topthema: Träume werden wahr
Standlautsprecher · ESS AMT-1 D Revival
Für die Älteren unter uns gehören diese Lautsprecher zu den ersten jugendlichen Audiowunschträumen, wie zum Beispiel das Klipschorn oder die Electro Voice Sentry III. Für alle anderen könnte dieser besondere Lautsprecher eine echte Überraschung werden.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Tannoy VXP 12Q
Ausstattung & technische Daten
| Performance | |
| Frequency Response (-3 dB) (1) Full Range Mode | 70 Hz - 25 kHz |
| Frequency Range (-10 dB) (1) Full Range Mode | 60 Hz - 30 kHz |
| Frequency Response (-3 dB) (1) High Pass Mode | 100 Hz - 25 kHz |
| Recommended Crossover | 80 Hz - 300 Hz, 24 dB / octave Recommended High-pass filter 40 Hz, 24 dB / octave |
| Dispersion (-6 dB) | 75 degrees (Horizontal) x 40 degrees (Vertical) |
| Driver Complement | 1 x 300 mm (12") PowerDual |
| Crossover | Passive 1.5 kHz |
| Directivity Factor (Q) | 13 averaged 1 kHz to 8 kHz |
| Directivity Index (DI) | 11.1 averaged 1 kHz to 8 kHz |
| Rated Maximum SPL (2) | Average: 123 dB |
| Peak: 129 dB | |
| Distortion | |
| 10% Full Power (16.7 V) | 2nd Harmonic 250 Hz: 0.72%, 1 kHz: 0.57%, 10 kHz: 5.11% |
| 3rd Harmonic 250 Hz: 0.17%, 1 kHz: 0.76%, 10 kHz: 0.41% | |
| 1% Full Power (5.3 V) | 2nd Harmonic 250 Hz: 0.16%, 1 kHz: 0.18%, 10 kHz: 1.63% |
| 3rd Harmonic 250 Hz: 0.19%, 1 kHz: 0.49%, 10 kHz: 0.08% | |
| Amplifier | |
| Maximum signal input for clip | Input attenuator at Maximum: +4.5 dBu (Hard clip will occur at 14.5 dBu input signal) |
| Dynamic Range | 106 dB |
| Efficiency | >90% |
| Damping Factor | >400 ref 8 ohm at 1 kHz |
| Distortion | <0.05% @ 1 kHz - 3 dB output (22 kHz bandwidth) |
| Input Impedance | 10 kOhms (unbalanced)20 kOhms (balanced) |
| PSU Specifications | |
| Input Connector | Locking Neutrik Powercon |
| Voltage Selection | Universal mains input |
| System Type | High efficiency, regulated switch mode power supply |
| Efficiency | >85% typical |
| Input voltage | 100 Vac - 240 Vac +/- 10%, 50 - 60 Hz +/-10% |
| Mains fuse | Internal |
| Fuse type | 3.15AT |
| Other features | Inrush current limiter |
| Standby power consumption | < 1 W |
| Idle power consumption | < 15 W |
| Maximum power consumption | 300 W |
| Protection Systems | |
| Over Current | Output current limiter, always active |
| Clip limiter | Output voltage clip limiter, always active |
| Temperature | Over temperature causes protective mute |
| Brownout | Automatic protection & recovery |
| Mains | Inrush current limiter |
| Indicators | 1 x Power LED 1 x Signal LED 1 x Limit LED (Power LED: Red = Standby, Green = On, Yellow = Temperature protection active) |
| Amplifier Type | Inherently bridged, globally modulated, high Performance single channel class D |
| Construction | |
| Enclosure | 36.4 litre, 15 mm (enclosure) and 18 mm (front) birch plywood, vented and internally braced |
| Finish | Textured black or white paint (custom colours on request) Powder coated perforated steel grille Airnet cloth behind |
| Connectors | 1 x female XLR (input) 1 x male XLR (link) 1 x Neutrik Powercon |
| Controls & Indicators | Level Control Power LED (Blue) Signal LED (Green) Limit/Protect LED (Red) Full Range / HighPass Switch (110 Hz) Power Mode Switch Power Switch |
| Dimensions (H x W x D) | 490 x 370 x 380 mm |
| Weight | 23 kg |
Top Händler
|
305-2128
MD Sound GmbH & Co. KG |
