488_23522_2
Topthema: Ingenieurskunst in Perfektion
Revelation RX2 PRO – High-End Zweikanalendstufe von Brax
Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigen
501_17398_1
Anzeige
Topthema: Norddeutsche HiFi-Tage
2025 im Hotel Le Méridian Hamburg direkt an der Alster
Die Norddeutschen HiFi-Tage finden 2025 im Hotel Le Méridian Hamburg direkt an der Alster statt. Am 01.02.2025, von 10–18 Uhr und am 02.02.2025, von 10–16 Uhr können Interessierte bei freiem Eintritt durch die Vorführungen und Showrooms schlendern.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Tannoy VXP 12HP
Ausstattung & technische Daten
| Performance | |
| Frequency Response (-3 dB) (1) Full Range Mode | 70 Hz - 25 kHz |
| Frequency Range (-10 dB) (1) Full Range Mode | 60 Hz - 30 kHz |
| Frequency Range (-10 dB) (1) High Pass Mode | 80 Hz - 30 kHz |
| Dispersion (-6 dB) | 75 degrees conical |
| Driver Complement | 1 x 300 mm (12") constant directivity PowerDual |
| Crossover | Passive 1 kHz |
| Directivity Factor (Q) | 10.1 averaged 1 kHz to 10 kHz |
| Directivity Index (DI) | 10 averaged 1 kHz to 10 kHz |
| Rated Maximum SPL (2) | Average: 123 dB |
| Peak: 129 dB | |
| Distortion | |
| 10% Full Power (16.7 V) | 2nd Harmonic 250 Hz: 0.239%, 1 kHz: 1.58%, 10 kHz: 5.2% |
| 3rd Harmonic 250 Hz: 0.67%, 1 kHz: 3.54%, 10 kHz: 0.19% | |
| 1% Full Power (5.29 V) | 2nd Harmonic 250 Hz: 0.11%, 1 kHz: 0.79%, 10 kHz: 1.94% |
| 3rd Harmonic 250 Hz: 0.581%, 1 kHz: 2.53%, 10 kHz: 0.161% | |
| Amplifier | |
| Maximum signal input for clip | Input attenuator at Maximum: +4.5 dBu (Hard clip will occur at 14.5 dBu input signal) |
| Dynamic Range | 106 dB |
| Efficiency | >90% |
| Damping Factor | >400 ref 8 ohm at 1 kHz |
| Distortion | <0.05% @ 1 kHz - 3 dB output (22 kHz bandwidth) |
| Input Impedance | 10 kOhms (unbalanced)20 kOhms (balanced) |
| PSU Specifications | |
| Input Connector | Locking Neutrik Powercon |
| Voltage Selection | Universal mains input |
| System Type | High efficiency, regulated switch mode power supply |
| Efficiency | >85% typical |
| Input voltage | 100 Vac - 240 Vac +/- 10%, 50 - 60 Hz +/-10% |
| Mains fuse | Internal |
| Fuse type | 3.15AT |
| Other features | Inrush current limiter |
| Standby power consumption | < 1 W |
| Idle power consumption | < 15 W |
| Maximum power consumption | 300 W |
| Protection Systems | |
| Over Current | Output current limiter, always active |
| Clip limiter | Output voltage clip limiter, always active |
| Temperature | Over temperature causes protective mute |
| Brownout | Automatic protection & recovery |
| Mains | Inrush current limiter |
| Indicators | 1 x Power LED 1 x Signal LED 1 x Limit LED (Power LED: Red = Standby, Green = On, Yellow = Temperature protection active) |
| Amplifier Type | Inherently bridged, globally modulated, high Performance single channel class D |
| Construction | |
| Enclosure | 36.4 litre, 15 mm (enclosure) and 18 mm (front) birch plywood, vented and internally braced |
| Finish | Textured black or white paint (custom colours on request) Powder coated perforated steel grille Airnet cloth behind |
| Connectors | 1 x female XLR (input) 1 x male XLR (link) 1 x Neutrik Powercon |
| Controls & Indicators | Level Control Power LED (Blue) Signal LED (Green) Limit/Protect LED (Red) Full Range / HighPass Switch (110 Hz) Power Mode Switch Power Switch |
| Dimensions (H x W x D) | 490 x 370 x 380 mm |
| Weight | 23.5 kg |
Top Händler
|
305-2128
MD Sound GmbH & Co. KG |
