492_17301_1
Anzeige
Topthema: FINEST AUDIO SHOW Vienna 2024
Klangvolles Wochenende auf der HiFi-Messe in Österreich
Im Mittelpunkt der FINEST AUDIO SHOW Vienna am 23. und 24. November 2024 in Wien steht die Leidenschaft für HiFi-Technik, Musikwiedergabe und den perfekten Klang.
>> Mehr erfahren>> Alle anzeigen
488_23522_2
Topthema: Ingenieurskunst in Perfektion
Revelation RX2 PRO – High-End Zweikanalendstufe von Brax
Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Tannoy VQNET 40MH
Ausstattung & technische Daten
| Performance | |
| System Type | 2-Way Mid/High - Point Source |
| Frequency Response (-3 dB) (1) | 400 Hz - 23 kHz |
| Frequency Range (-10 dB) (1) | 350 Hz - 27 kHz |
| Dispersion (-6 dB) | 40 degrees conical |
| Driver Complement Mid/High Frequency | Dual Concentric |
| Crossover | 7 kHz (DSP generated) |
| Recommended High Pass | |
| Filter @ 450 Hz (DSP generated) | |
| Directivity Factor (Q) | 28.8 averaged 1 kHz to 10 kHz |
| Directivity Index (DI) | 14.6 averaged 1 kHz to 10 kHz |
| Rated Maximum SPL (2) | Average: 140 dB |
| Peak: 146 dB | |
| Distortion | |
| 110 dB SPL | 2nd Harmonic 500 Hz: 1.202%, 2 kHz: 0.817%, 5 kHz: 1.104% |
| 3rd Harmonic 500 Hz: 0.218%, 2 kHz: 0.025%, 5 kHz: 0.046% | |
| 115 dB SPL | 2nd Harmonic 500 Hz: 2.139%, 2 kHz: 1.420%, 5 kHz: 1.710% |
| 3rd Harmonic 500 Hz: 0.347%, 2 kHz: 0.070%, 5 kHz: 0.111% | |
| 120 dB SPL | 2nd Harmonic 500 Hz: 3.860%, 2 kHz: 2.618%, 5 kHz: 2.418% |
| 3rd Harmonic 500 Hz: 0.657%, 2 kHz: 0.241%, 5 kHz: 0.270% | |
| 125 dB SPL | 2nd Harmonic 500 Hz: 7.014%, 2 kHz: 4.554%, 5 kHz: 2.948% |
| 3rd Harmonic 500 Hz: 1.490%, 2 kHz: 0.613%, 5 kHz: 0.653% | |
| Electronics | |
| Efficiency | >85% typically |
| Damping Factor | 120 ref 8 Ohms |
| Distortion | <0.05% @ 1 kHz - 3 dB output (22 kHz bandwidth) |
| Input Impedance | 5.6 kOhms (unbalanced)11.2 kOhms (balanced) |
| Output Power (Programme) | 400 W Mid Frequency |
| 200 W High Frequency (limited to) | |
| Input Sensitivity | 1.4 V (+5.5 dBu) |
| System Type | Dual channel Class D |
| PSU Specifications | |
| Input Connector | Locking Neutrik Powercon |
| Voltage Selection | Automatic (115 / 230 V, 45 - 65 Hz) |
| System Type | High current, high frequency switch mode |
| Efficiency | >90% typical |
| Input voltage | 100 V / 115 V / 230 V nominal +/-10% |
| Mains fuse | External |
| Fuse type | T10AT |
| Other features | Automatic soft start |
| Current Draw | 115 V, 230 V |
| Startup (inrush) | 3.5 A, 1.9 A |
| Idle | 1.1 A, 0.56 A |
| Max | 3.5 A, 1.7 A |
| DSP System | |
| Comms Facilities | Firmware updatable and selected parameters editable |
| Communications | Serial - RS485 Proprietary message format |
| Dynamic Range | 112 dB (A) typical |
| DSP | 3rd generation SHARC |
| Sampling Frequency | 96kHz 24 bit A/S-D/A word length |
| Format | 1 IN - 2 OUT |
| Construction | |
| Enclosure | 18 mm (0.71") birch plywood, vented and internally braced |
| Grille | Powder coated perforated steel grille |
| Finish | Textured black or white paint (custom colours on request) |
| Connectors | 1 x female XLR (input) 1 x male XLR (link) 1 x RJ45 (network in) 1 x RJ45 (network link) 1 x Neutrik Powercon 1 x Neutrik Powercon (outlet) |
| Controls & Indicators | LED on front of cabinet behind grille (wink indicator for locating & assigning) Power LED (blue) Signal LED (green) Limit LED (red) User DSP - defeat switch Power switch |
| Fittings | 2 x Recessed carrying handles |
| 11 x M10 flying inserts | |
| Dimensions (H x W x D) | 510 x 694 x 515 mm |
| Net Weight (ea) | 32.5 kg |
Top Händler
|
305-2128
MD Sound GmbH & Co. KG |
