Unser Hobby spiegelt die Welt da draußen wider: immer mehr, immer größer, immer teurer muss es sein. Zum Glück gibt es aber auch Gegenbeispiele. Mit dem dänischkanadischen Traumduo kann man seinen irdischen Musikfrieden finden.
>> Mehr erfahren>> Alle anzeigenMit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Dynaudio AIR 20
Features | |
High accuracy drivers hand built in Denmark | |
10" molded woofer, polypropylene cone w/ 3" pure aluminum voice coil | |
5.5" molded polypropylene cone, pure aluminum voice coil | |
1.1" soft dome tweeter, rear chamber magnetic fluid, pure aluminum voice coil | |
192 kHz support via Dual Wire | |
The new 221 (two-to-one) design - Integrating unique Tweeter and Midrange technology | |
Bass Management, with selectable frequency crossover points | |
Advanced Bass Management | |
Acoustic Placement Compensation | |
Preset Storage and RecallProgrammable reference levels | |
Level alignment in 0,1 dB steps | |
All Monitors aligned within +/- 0.2 dB precision | |
Integrated Parametric EQs and delay in each monitor (only accessible with PC-IP) | |
Central and Remote control of system and parameters | |
Direct Digital inputs and Analog inputs (optional) | |
Networking in-between all AIR components | |
Dedicated AIR Base subwoofers | |
Two times 200-watt amp package in each monitor | |
Technical Specifications | |
Model | AIR 20 |
System | Three way active monitoring system |
Frequency Response (+/- 3 dB) | 31 Hz –22 kHz: +/- 3 dB |
Peak SPL 1m, pair (IEC Short Term) | > 131 dB peak |
Peak SPL 2m, 5.1 (IEC Short Term) | > 129 dB peak |
Max SPL 1m, (IEC Long Term) | 104 dB RMS |
Precision of monitor matching | +/- 0.2 dB |
Port tuning frequency | 40 Hz |
Internal cabinet volume | 35 litres |
Bass principle | Bass reflex |
Crossover frequency | 390 Hz (DSP generated) and 2600 Hz |
Crossover slope | 12 dB/oct and 6 dB/oct |
Tweeter | Esotar 28 mm / 1.1” soft dome, neodymium magnet, rear chamber, magnetic fluid, 4mm alu front, pure alu wire voice coil |
Midrange | 145 mm / 5,5", one-piece molded polypropylene cone, 38 mm / |
Woofer | 240 mm / 9,5", one-piece molded polypropylene cone, 100 mm / |
Mains voltage | 100 to 240 VAC, 50 to 60 Hz (auto-select) |
Power consumtion | 45 W @ 1/8 max power (IEC 60065) |
Amp | Black painted back plate |
Cabinet | Black ash with dark gray MDF baffle |
Dimensions (W x H x D) | 575 x 310 x 395 mm / 22,6” x 12,2” x 15,5” |
Weight | 28 kg / 62.2 lbs |
Tweeter, midrange and woofer | Tweeter & Midrange 200 W amp/Woofer 200 W amp |
Typical listening distance | 1.5-3 m / 5-10.2 ft |
Typical room size | 80-130 m3 / 2800-4600 ft3 |
Internal sample rate | 192 and 176.4 via Dual Wire (optional Digital Card required) and 96, 88.2, 64, 48, 44.1 or 32 kHz |
I/O Connectors | XLR (2 channels AES/EBU in) 3 x RJ 45 proprietary TC Link |
Formats | AES/EBU (24 bit) |
Word clock input | BNC, 75ohm, 0.6-10 Vpp |
Display | 2 x 16 character dot matrix |
Operation | Menu system / Four buttons |
Input connectors | XLR balanced (pin 2+, pin 3-) |
Impedance | 10/3 k ohm (Balanced/unbalanced) |
Selectable Full scale Input level | +9, +15, +21, +27 dBu |
Dynamic range | > 113 dB typ. (unweighted), BW: 20-20 kHz |
THD+N | < -105 dB typ. @ 1 kHz, -3 dBFS |
Crosstalk | < -120 dB, 20 Hz to 20 kHz |
A to D Conversion | 24 bit (Dual bit delta sigma sampling at 4.1/5.6/6.1/6.1 MHz) |
I/O Connectors | 2 x RJ45 proprietary TC-Link |
Complies with | EN 55103-1 and EN 55103-2, FCC part 15 class B, CISPR 22 class B |
Certified to | IEC 60065, EN 60065, UL 6500 and CSA E60065 CSA FILE #LR108093 |
Operating temperature | 32° F to 122° F (0° C to 50° C) |
Storage temperature | -22° F to 167° F (-30° C to 70° C) |
Humidity | Max. 90 % non-condensing |