489_23584_2
Topthema: Träume werden wahr
Standlautsprecher · ESS AMT-1 D Revival
Für die Älteren unter uns gehören diese Lautsprecher zu den ersten jugendlichen Audiowunschträumen, wie zum Beispiel das Klipschorn oder die Electro Voice Sentry III. Für alle anderen könnte dieser besondere Lautsprecher eine echte Überraschung werden.
>> Mehr erfahren>> Alle anzeigen
490_0_3
Anzeige
Topthema: Kinofeeling für Zuhause
Genießen Sie höchsten Komfort mit Kinosofas von Sofanella
Die hochwertigen Sessel und Sofas von Sofanella sind modern, bezahlbar und schaffen ein gemütliches sowie ein bequemes Heimkinoerlebnis
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Phono Vorverstärker
Ausstattungsliste: VAC Signature Mk IIa SE
Ausstattung & technische Daten
| Technical specification | |
| Gain | 12 dB |
| Inputs | 3 sets RCA line input |
| 2 sets balanced/RCA selectable inputs | |
| set RCA cinema bypass input | |
| Optional 1 MM and 1 MC (or additional line input if phono is not fitted) | |
| Outputs | 2 sets RCA |
| 2 sets balanced XLR (EIA “pin 2 hot” studio standard) | |
| Tubes | 2x 8416, 7308, 6922, E88CC, ECC88, 6DJ8, (or 12DJ8 twin triodes) |
| Absolute Phase | correct from all inputs to all outputs |
| Frequency Response | Flat over audio band –3 dB bandwidth 5 Hz – 210 kHz |
| THD | <0.009% @ 1 kHz, 1 V RMS |
| Maximum Output | < 8 V RMS |
| Output Impedance | < 150 ohms, 20 Hz - 20 kHz, static (i.e., not dependent upon feedback) |
| Maximum Input | Infinite signal (attenuation precedes the gain circuitry) |
| Recommended Output Load | > 300 ohms |
| Power | External power supply, detachable umbilical cable, detachable IEC power cord |
| Cinema Bypass | Yes |
| Voltage | May be ordered for 100v, 120v, 220v, or 230/240v operation |
| Remote Control | included |
| Illumination | Illuminated logo may be switched off |
| Finish | Hand-rubbed gold-flake gloss black lacquer with chrome knobs standard. |
| Hand-rubbed metallic gloss silver lacquer with chrome knobs special order with additional cost. | |
| Dimensions (H x W x D) | Audio chassis (not including knobs and connectors): 5.5" x 18" x 14.5" (14 cm x 45.7 cm x 36.8 cm) |
| Power supply (not including connectors): 4.3" x 18" x 14.5" (10.9 cm x 45.7 cm x 36.8 cm) | |
| Shipping Weight | With phono: 61 lbs. (27.7 kg.) |
| Phono Stage (optional) | |
| Tubes | 6x 12AX7 |
| Gain | 44 dB MM |
| 64 dB MC | |
| Frequency Response | RIAA standard +/- 0.2 dB (20 Hz - 20 kHz) -3 dB bandwidth 10 Hz - • 80 kHz |
| Channel Separation | > 80 dB @ 1 kHz |
| Maximum Input | > 130 mv @ 1 kHz, MM |
| > 13 mv, MC | |
| MC Load Impedance | selectable, 470, 300, 250, 200, 150, and 100 ohms |
| MM Load Impedance | selectable, 47k, 30k, 25k, 15k, and 10k ohms |
| Overload | 117MV @ 1kHz = 8 volts RMS output; 460MV @ 10kHz |
| Residual Noise | Less than 3MV at output (s/n ratio greater than approx. 69db) |
