Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenMit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Endstufen
Ausstattungsliste: Parasound A 52+
Specification | |
Power Output - All 5 Channels Driven | 180 watts x 5, 8 Ω |
255 watts x 5, 4 Ω | |
Power Output - 2 Channels Driven | 225 watts x 2, 8 Ω |
350 watts x 2, 4 Ω | |
Power measurements parameters | with 120VAC 0.05% THD, RMS continuous power, full audio band (20 Hz - 20 kHz) |
Frequency Response | 45 amperes peak, per channel |
Total Harmonic Distortion (THD) | < 0.05 % at full power |
Dynamic Headroom | >1.5dB |
Slew Rate | > 130 volts per microsecond |
Frequency Response | 5 Hz - 100 kHz, +0/-3 dB |
20 Hz - 20 kHz, +0/-0.3 dB | |
Total Harmonic Distortion | 0.25% at full rated output |
0.015% at average listening levels | |
IM Distortion | - 0.05 % |
TIM | Not measurable |
Interchannel Crosstalk | > 78 dB at 1 kHz |
> 63 dB at 20 kHz | |
Input Impedance | Unbalanced: 47 kΩ |
Balanced: 94 kΩ, 47 kΩ per leg | |
Input Sensitivity for 28.28 V Output into 8 Ω | Unbalanced: 1 V |
Balanced: 1 V per leg | |
Total Gain: 29 dB | |
S/N Ratio | > 112 dB, input shorted, IHF A-weighted |
> 102 dB, input shorted, unweighted | |
Damping Factor | > 1100 at 20 Hz |
DC Trigger Requirements | 9 - 12V, 15 mA |
Audio Trigger Requirements | 2 mV - 10 mV |
XLR Pin Identification | 1 = Ground (Shield) |
2 = Positive | |
3 = Negative (Return) | |
AC Power Requirement | Standby: 1 Watt |
Idle: 125 Watts | |
1500 Watts | |
Dimensions | Width: 17-1/4" (437 mm) |
Height without feet: 5-1/4" (133 mm) | |
Height with feet: 5-7/8" (149 mm) | |
Depth: 20" (508 mm) | |
Net Weight | 55 lb. (25 kg) |