Form follows function ist ja ein geflügeltes Wort für Design um die technischen Notwendigkeiten herum. Dass man aber auch beide Aspekte gleichwertig behandeln und auf die Spitze treiben kann, zeigt uns die neue Serie 1528 von Arendal.
>> Mehr erfahren>> Alle anzeigenUnser Hobby spiegelt die Welt da draußen wider: immer mehr, immer größer, immer teurer muss es sein. Zum Glück gibt es aber auch Gegenbeispiele. Mit dem dänischkanadischen Traumduo kann man seinen irdischen Musikfrieden finden.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: JBL Control 23-1L
Specification | |
Type | Ultra-Compact 8-Ohm Indoor/Outdoor Background/Foreground Speaker | |
Frequency Range (-10 dB) | 70 Hz to 20 kHz |
Frequency Response (+/-3 dB) | 95 Hz - 19 kHz |
Maximum Input Voltage | 17.2 V RMS (2 hrs), 34.4 V peak |
Maximum SPL | 103 dB ave. Continuous Pink Noise (109 dB peak) |
Sensitivity | 86 dB, 1W/1m (ave. 100 Hz – 10 kHz) |
Coverage Angle | 100° x 100° |
Directivity Factor (Q) | 5.8 (averaged 1kHz – 16kHz) |
Directivity Index (DI) | 7.2 dB (averaged 1kHz – 16kHz) |
Nominal Impedance | 8 ohms (THRU setting) |
Crossover Type | 2nd order low-pass, 2nd order high-pass |
Recommended Protective High-Pass | 70 Hz high-pass (24 dB/oct) |
Low Frequency Driver | 76 mm (3.0 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp Kapton™ voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure. |
High Frequency Driver | 13 mm (0.5 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former. |
Enclosure Material | High Impact Polystyrene (HIPS), painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance. |
Grille | Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-23WMG-1 (&-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing. |
Installation | InvisiBall™ wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-23UB-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel. |
Environmental | IP-44 per IEC529 (IP-55 when installed with the optional MTC-23WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. |
Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-23WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments. | |
Termination | Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). |
Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection. | |
Agency Rating | ROHS-compliant |
Colors | Black (RAL9004) or white (-WH, RAL9016) |
Dimensions (H x W x D) | 200 x 141 x 111 mm (7.9 x 5.6 x 4.4 in); 141 mm (5.6 in) deep total when mounted on InvisiBall wall-mount bracket. |
Net Weight | 1.6 kg (3.4 lbs) |
Included Accessories | InvisiBall™ wall-mounting system, 4 mm x 80 mm hex key |
106-2394
HiFi Gogler | Oliver Gogler e.K. |