Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigenForm follows function ist ja ein geflügeltes Wort für Design um die technischen Notwendigkeiten herum. Dass man aber auch beide Aspekte gleichwertig behandeln und auf die Spitze treiben kann, zeigt uns die neue Serie 1528 von Arendal.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: dbx 560A
Specifications | |
Type | Compressor/Limiter |
Input Type | Electronically balanced/unbalanced, RF filtered |
Input Impedance | 40kΩ balanced, 20kΩ unbalanced |
Max Input Level | +22dBu |
CMRR | >40 dB; typically >55 dB at 1 kHz |
Output Type | Electronically balanced/unbalanced, RF filtered |
Output Impedance | Balanced 30Ω , unbalanced 15Ω |
Max Output Level | +22 dBu |
Frequency Response | 20 Hz – 20 kHz, + 0/-0.5 dB; 0.5 Hz – 100 kHz, +0/-3 dB |
Noise | <-97 dBu, Unweighted (22 Hz – 22 kHz) |
THD+Noise | <0.005% typical, No compression, 1 kHz input at 0 dBu; <0.07% typical, Any Amount of Compression up to 40 dB @ 1 kHz |
Dynamic Range | >119 dB |
Compression Gain Adjustment Range | Variable from -20 dB to +20 dB |
Compressor Threshold Range | -40 dBu to +20 dBu |
Compressor Threshold Characteristic | Selectable OverEasy® or Hard Knee |
Compressor Ratio | Variable 1:1 to ∞ :1 thru to -1:1; 60dB Maximum Compression |
Compressor Attack Time | Program-Dependent; Typically 15ms for 10dB, 5ms for 20dB, 3ms for 30dB |
Compressor Release Time | Program-Dependent; Typically 8ms for 1dB, 80ms for 10dB, 400ms for 50dB; 125dB/Sec Rate |
Power Requirements | +/- 16VDC |
Current Draw | 60mA per power rail |
Power Draw | 1.92 watts |
Rack System Compatibility | 500 Series Compatible Power-frame |
Rack Space | 1 Slot |
Dimensions (H x W x D) | 5.25” x 1.5” x 6” (13.34cm x 3.81cm x 15.24cm) |
Weight | 1.3 lbs (0.59 kg) |