487_23559_2
Topthema: Totale Eleganz
Arendal 1528 Monitor 8
Form follows function ist ja ein geflügeltes Wort für Design um die technischen Notwendigkeiten herum. Dass man aber auch beide Aspekte gleichwertig behandeln und auf die Spitze treiben kann, zeigt uns die neue Serie 1528 von Arendal.
>> Mehr erfahren>> Alle anzeigen
488_23522_2
Topthema: Ingenieurskunst in Perfektion
Revelation RX2 PRO – High-End Zweikanalendstufe von Brax
Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Crestron AMP-150-70
Ausstattung & technische Daten
| Specification | |
| Type | Single-Channel Modular Power Amplifier, 50 W, 70 V |
| Audio | |
| Input Signal Types | Balanced or unbalanced analog line‑level |
| Output Power | 50 W @ 70 V nominal |
| Frequency Response | 200 Hz to 20 kHz ±0.5 dB |
| High‑Pass Filter | ‑3 dB @ 80 Hz, 12 dB per octave |
| THD+N | <0.1%1 |
| S/N Ratio | >100 dBA, 20 Hz to 20 kHz, balanced |
| Input Sensitivity | 1.23 Vrms, +4 dBu balanced; 0.316 Vrms, ‑10 dBV unbalanced; For full rated output power |
| Protection | Clip limiter, over current, under voltage, over temperature, DC offset, extreme high frequency |
| Connectors | |
| SPEAKER OUT | (1) 2‑pin 7.62 mm reversed gender 20 A detachable terminal block; Power amplifier output; Wire Size: Terminals accept up to 12 AWG (3.31 mm2) Note: Output is direct‑coupled, not transformer isolated |
| AUDIO IN L/R (unbalanced) | (2) RCA connectors, female; Unbalanced line‑level audio inputs (summed); Maximum Input Level: 2.24 Vrms, +7 dBV (+9.2 dBu) |
| AUDIO IN L/R (balanced) | (1) 5‑pin 3.5 mm detachable terminal block; Balanced line‑level audio inputs (summed); Maximum Input Level: 7.75 Vrms, +20 dBu; Input Impedance: 20k Ohms |
| G | (1) 6‑32 screw; Chassis ground lug |
| 100‑240V~1A 50/60 Hz | (1) IEC 60320 C14 main power inlet; Mates with removable power cord, included |
| Controls & Indicators | |
| PWR | (1) Green LED, indicates operating power supplied from AC line power |
| FAULT | (1) Red LED; indicates an over‑temperature or over‑current fault |
| SIGNAL | (1) Bi‑color green/red LED, green indicates input signal presence and red indicates input signal clipping |
| Input Level | (1) Screwdriver‑adjustable rotary control, adjusts the input attenuation level, tamper‑preventive magnetic cover included |
| Power | |
| Main Power | 1 A @ 100‑240 VAC, 50/60 Hz |
| Power Consumption | 17 W, channel driven at 1/8th output power; 8 W, idle |
| Environmental | |
| Temperature | 41° to 104° F (5° to 40° C) |
| Humidity | 10% to 90% RH (non‑condensing) |
| Construction | |
| Chassis | Metal, convection‑cooled (fanless), vented front and rear |
| Front Panel | Metal, black finish with polycarbonate label overlay |
| Mounting | Freestanding, surface‑mount, or 1/4‑width 1 RU 19 in. rack‑mountable; gangable with other Crestron modular AMP series products (adhesive feet, surface mounting kit, ganging kit, and rack mounting kit included) |
| Dimensions | |
| Height | 1.74 in. (45 cm) without feet; 1.82 in. (47 mm) with surface kit |
| Width | 4.33 in. (110 mm); 5.43 in. (138 mm) with surface kit; 19.00 in. (483 mm) with rack kit |
| Depth | 10.46 in. (266 mm) |
