488_23522_2
Topthema: Ingenieurskunst in Perfektion
Revelation RX2 PRO – High-End Zweikanalendstufe von Brax
Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigen
489_23584_2
Topthema: Träume werden wahr
Standlautsprecher · ESS AMT-1 D Revival
Für die Älteren unter uns gehören diese Lautsprecher zu den ersten jugendlichen Audiowunschträumen, wie zum Beispiel das Klipschorn oder die Electro Voice Sentry III. Für alle anderen könnte dieser besondere Lautsprecher eine echte Überraschung werden.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: CODA Audio LINUS5-C
Ausstattung & technische Daten
| Specification | |
| Type | 4 Channel DSP Amplifier with Loudspeaker Management |
| General | |
| Number of output channels | 4 |
| Output stage | Class D |
| Internal samplerate / bit-depth | 96 kHz / 24 bit |
| Output-to-noise ratio (22 Hz – 20 kHz, 4 Ω – analogue input) | >112 dB (unweighted) |
| >115 dB (A-weighted) | |
| Signal-to-noice ratio (22 Hz – 20 kHz, 4 Ω – digital input) | >114 dB (unweighted) |
| >117 dB (A-weighted) | |
| Frequency response (8 Ω load with CLEAR preset) | 20 Hz – 20 kHz = (+0.5 dB /-1.0 dB) |
| THD+N & IMD (4 Ω load @ 1/2 output power) | 20 Hz – 17 kHz = < 0.01% |
| Latency (input to loudspeaker output) | Minimum 2.70 ms AES/EBU input |
| Minimum 2.00 ms analogue input | |
| Protection circuits | Inrush current limiter Thermal limiter Output DC SMPS over-current Output overload |
| LED indicators | Mute status Limit 0 dB Signal Protection Ethernet control active Digital signal locked Power on |
| Ethernet connection | 1 x 10 Mbps RJ45 |
| AC Mains | |
| AC mains input connector | Neutrik 32A powerCON® |
| AC mains input voltage** (230 V internal jumper setting) | 180 V = Minimum |
| 230 V = Nominal | |
| 264 V = Maximum | |
| AC mains input voltage** (115 V internal jumper setting) | 85 V = Minimum |
| 115 V = Nominal | |
| 132 V = Maximum | |
| AC mains frequency | 47 – 63 Hz |
| Power consumption (1/4 power = 600 W @ 4 Ω to represent typical music signal) | Amplifier in standby = 27 W |
| Amplifier idle = 115 W | |
| Amplifier ¼ power = 851 W | |
| Input | |
| Input sources | Analogue & AES/EBU |
| Analogue input impedance (balanced) | 30 kΩ |
| Maximum input level (analogue differential) | +15 dBu / 4.36 Vrms |
| Input connections | 4x XLR3 Analogue IN |
| 1x RJ45 Analogue IN (4x CH) | |
| 1x RJ45 Analogue LINK (4x CH) | |
| 1x RJ45 Digital IN (4x CH) | |
| 1x RJ45 Digital LINK (4x CH) | |
| Supported digital input formats (internal SRC) | 32 kHz / 44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192 kHz |
| Output | |
| RMS output power (20 Hz – 20 kHz, THD <0.1%) (all channels driven) | 400 W @ 8 Ω |
| 700 W @ 4 Ω | |
| 900 W @ 2.7 Ω | |
| 1250 W @ 2 Ω | |
| Peak output power (20 Hz – 20 kHz, 6 dB Crest Factor) (all channels driven) | 900 W pk @ 8 Ω |
| 1600 W pk @ 4 Ω | |
| 1700 W pk @ 2.7 Ω | |
| 1600 W pk @ 2 Ω | |
| Maximum output voltage | +/- 85 V pk |
| Maximum output current | +/- 38 A pk |
| Damping Factor (8 Ω load, 1 kHz & below) | > 400 |
| Minimum output load | 2 Ω nom |
| Power output connections | 2x Neutrik NL4 speakON® |
| 1x Neutrik NL8 speakON® | |
| Thermal | |
| Operating temperature | +5°C to +55°C |
| 41°F to 131°F | |
| Thermal output (BTU/h) | 307.09 = Idle |
| 665.37 = 20 % | |
| 1207.90 = 50 % | |
| 2108.70 = 100 % | |
| Thermal output (kWh) | 0.090 = Idle |
| 0.195 = 20 % | |
| 0.354 = 50 % | |
| 0.618 = 100 % | |
| Cooling | 2x thermally controlled fans |
| Hot air expelled at rear | |
| Physical | |
| Dimensions (WxHxD) | 483.5 x 88 x 454.18 mm / 19.04” x 3.46” x 17.88” (2 Rack units) |
| Net Weight | 10.7 kg / 23.6 lbs |
