Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenMit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Endstufen
Ausstattungsliste: Anthem P2
GENERAL | |
Inputs | 2 Single-Ended, 2 Balanced, 1 Relay Trigger (3.5 mm Mono Jack) |
Outputs | 2 Pairs Speaker Binding Posts, 1 Relay Trigger (3.5 mm Mono Jack) |
THD+N (225 W into 8 Ω) | 0.0007% at 1 kHz, 0.008% at 20 kHz |
IMD | 0.00019% (CCIF, 325 W into 8 Ω) |
Power Bandwidth | 10 Hz to 150 kHz (+0 -3 dB, 325 W into 8 Ω) |
Frequency Response | 20 Hz to 20 kHz (+0 -0.15 dB), 5 Hz to 100 kHz (+0 -2 dB) |
Input Sensitivity (RCA and XLR 0 dB inputs) | 1 Vrms in for 28.3 Vrms out (100 W into 8 Ω) |
Input Impedance | 18 kΩ (RCA), 22 kΩ (XLR) |
Damping Factor | >600 at 20 Hz, 400 at 1 kHz (ref. 8 Ω) |
S/N Ratio | 125 dB, A-weighted (ref. 325 W) |
Crosstalk (between any two channels) | -140 dB (20 Hz), -80 dB (20 kHz) |
Voltage Gain | 29 dB |
Slew Rate | 40 V/µs |
SWITCHES | |
Front Panel | Power (On/Off) |
Rear Panel | On/Off Modes (Trigger, Manual, Auto), Inputs (RCA, XLR, XLR -6dB) |
POWER OUTPUT | |
Impedance 8Ω of Channels Driven | 1: 325 W |
All: 325 W | |
Impedance 4Ω of Channels Driven | 1: 500 W |
All: 500 W | |
Impedance 2Ω of Channels Driven | 1: 675 W |
All: 675 W | |
POWER REQUIREMENTS | |
Supply Voltage | 105 to 130 V, 60 Hz |
Power Consumption | 1800 W |
DIMENSIONS | |
Height | 9-3/8 inches (23.8 cm) including feet |
Width | Faceplate 19-1/4 inches (49 cm) |
Chassis 17-1/4 inches (43.8 cm) | |
Depth | 22-1/2 inches (57.2 cm) including handles |
Weight (unpacked) | 75 lb (34 kg) |