488_23522_2
Topthema: Ingenieurskunst in Perfektion
Revelation RX2 PRO – High-End Zweikanalendstufe von Brax
Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigen
502_23688_2
Topthema: Himmlisches Team
Dynaudio Contour 20i, MOON Audio 250i V2
Unser Hobby spiegelt die Welt da draußen wider: immer mehr, immer größer, immer teurer muss es sein. Zum Glück gibt es aber auch Gegenbeispiele. Mit dem dänischkanadischen Traumduo kann man seinen irdischen Musikfrieden finden.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Manley MICMAID
Ausstattung & technische Daten
| FEATURES | |
| 4x4 MIC / MICPRE MATRIX SWITCHER | |
| FOUR Microphones A/B/C/D matrix to FOUR external Microphone preamplifiers 1/2/3/4 | |
| LOCK each selection combination for comparison | |
| Front-panel 1/4" Direct Input with Variable Phase circuit and Ground Lift switch | |
| THRU: mirrored output of the Direct Input | |
| Low/High range select for Variable Phase all-pass filter | |
| Remote Fader jack for manual gain riding | |
| Polarity Switch flips phase 180degrees for selected Matrix path | |
| MONITOR SECTION has ±19.5 dB gain trim for each signal path | |
| STORE and RECALL settings for gain, mic & pre combinations | |
| Phantom Power selection for each microphone A/B/C/D | |
| DIRECT OUTPUT provided for each micpreamp return | |
| Pickle Remote can step through each microphone or each preamplifier for "sweet spot" selection | |
| Variable illumination brightness user-selectable in three levels | |
| High-quality, gold-contact sealed relays used throughout | |
| Neutrik gold-contact XLR jacks | |
| INSTRUMENT INPUT | -3 = +25 dBu |
| Input Impedance | 120K Ohms |
| Gain Ratio | 12:1 Step down. |
| Voltage Gain | -22 dB (Signal Source: Sine 1 kHz, +4dBu, 6K8 Ohm Source Impedance, 1K Ohm secondary load impedance) |
| ROUTING MATRIX | |
| Matrix Crosstalk | Leakage from adjacent microphone inputs: ≥ 117 dB (1 kHz sine) |
| Leakage from adjacent Preamp sends: ≥ 107 dB (1 kHz Sine) | |
| Microphone Inputs | terminated with source Z=150 Ohm, Preamps sends terminated with 2K7 Ohm load |
| MONITOR/RECORD OUTPUT | |
| Gain | ±19.5 dB (.5 db steps) |
| Frequency response | ±.5 db 10 Hz- 100 kHz |
| Outputs | XLR Electronically Balanced |
| Output Impedance | 66 Ohms |
| Max Output Level | Max Output Level:+28dbu into 100K load @ .025% THD+ NOISE |
| Distortion | 0.003% THD+NOISE |
| Bandwidth | 22 Hz - 22 kHz, Unity gain, into 100K Ohm load |
| Noise Floor | -90dbu A-weighted |
| Dynamic Range | 118 db |
| CMMR | ≥ 86 dB (1 kHz sine, 50mV input) |
| Note | Mon/Rec active stage ALWAYS "looks" at selected PREAMP as its signal source. |
| DIMS AND POWER | |
| Power Consumption Idle | 12 watts 0.1 Amp @ 120V |
| Power Consumption Maximum | 20 watts 0.17 Amp @ 120V |
| Mains Fuse | Mains Fuse: 500mA @ 100~120VAC; 250mA @ 220 ~ 240VAC |
| Mains Fuse type | 5mm x 20mm SLO-BLO GDC glass fuse, 250V AC rating |
| Note | Operating mains voltage: Units are purpose built for original destination countrys mains voltage: 100V, 120V, or 220-240VAC as indicated on the serial number badge. |
| The power transformer in this unit must be rewired in order to change mains operating voltage. | |
| Unit Size | 19" x 10" x 3.5" (occupies 2u) |
| Shipping Weight | 19 dim. (international); 17 lbs. (USA) |
