488_23522_2
Topthema: Ingenieurskunst in Perfektion
Revelation RX2 PRO – High-End Zweikanalendstufe von Brax
Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigen
390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Kind MCX 86
Ausstattung & technische Daten
| General | |
| Number of amplifier channels | 6 |
| Max output power single channel EIAJ test standard, 1 kHz, 1% THD | |
| 4 ohms | 80 W |
| 8 ohms | 50 W |
| Max output power bridged EIAJ test standard, 1 kHz, 1% THD | |
| 8 ohms | 160 W |
| Protection features | Short Circuit Protection, Current-Clip Limiter, Voltage Clip Limiter, Temperature protection |
| Amplifier audio performance | |
| Internal selectable filters | Low Pass Filter (100 Hz - 18 dB/oct), High Pass Filter (100 Hz - 18 dB/oct) |
| Input sensitivity @ 4 ohms | 0.775 V |
| Max input level | 18dBu |
| Frequency response | 20 Hz - 20 kHz (1 W @ 8 Ohm - +/- 0.5dB) |
| Noise (20 Hz - 20 kHz) | >106 dBA |
| Output circuitry | Class A/B |
| Input impedance | 10k balanced |
| THD+N | <0.05% from 1W to 0.5dB below clip (typically <0.01%) |
| Front panel | |
| Indicators | (LED) Active, signal out -30 dB, Clip / Limit |
| Controls | Mains switch, Gain control (per channel) |
| Rear panel | |
| Audio signal input connectors (per channel) | XLR female (balanced) |
| Loudspeakers output connectors | 4-pin terminal block (per pair channel) |
| AC mains cordset / chassis connector | Schuko CEE 7/7 16 A / Direct |
| Controls | (switch) Limiter ON (per channel), Link bus (one input link all channel), Bridge (per pair channel) |
| AC mains power | |
| Power supply | Switch mode power supply, internally switchable 230 / 115 V nominal |
| Operating voltage | 100-240 V +/-10%, 50-60 Hz |
| Current draw | @ 230 V / @ 115 V |
| Idle | 0.6 A / 0.7 A |
| 1/8 of max output power@ 4 ohms | 1.1 A / 1.7 A |
| 1/4 of max output power@ 4 ohms | 1.6 A / 2.8 A |
| Thermal | Operating temperature 0° - 40° C / 32° - 104° F |
| Dissipation and cooling | Fan, continuosly variable speed, temperature and load current controlled, front to rear airflow |
| Idle | 220 BTU/h | 55 kcal/h |
| 1/8 of max output power@ 4 ohms | 424 BTU/h | 107 kcal/h |
| 1/4 of max output power@ 4 ohms | 629 BTU/h | 158 kcal/h |
| Chassis construction | 1.5 mm / 0.1” zinc steel chassis; 3mm / 0.12” front panel ears and 1.5 mm / 0.1” rear support |
| Dimensions | W 483 mm / 19", H 89 mm / 2 RU, D 390 mm / 15.4" from front mounting railsmounting rails |
| Weight | 9.0 kg / 19.8 lb |
