Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigenVon Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Kind DQ+8000
General | |
Number of amplifier channels | 4 |
Total burst power all channels | 8000 W |
Max output power single channel EIAJ test standard, 1 kHz, 1% THD | |
2 ohms | 2000 W |
4 ohms | 1700 W |
8 ohms | 1000 W |
Hi-Z 70 V (note 1) | 1800 W |
Hi-Z 100 V (note 1) | 1500 W |
Max output power bridged EIAJ test standard, 1 kHz, 1% THD | |
4 ohms | 3400 W |
8 ohms | 4000 W |
Max output votage / current | 134 V / 45 A |
Protection features | Short Circuit Protection, Current-Clip Limiter, Voltage Clip Limiter, Temperature protection |
Amplifier audio performance | |
Gain, selectable | 26 dB, 29 dB, 32 dB (factory set), 35 dB, 38 dB, 41dB, 44 dB |
Input sensitivity @ 4 ohms | 2.07 V |
Max input level | 20 dBu |
Frequency response | 20 Hz - 20 kHz (1 W @ 8 Ohm - +/- 0.5dB) |
S/N ratio (20 Hz - 20 kHz) | >104 dBA |
Output circuitry | Class D |
Input impedance | 10k balanced |
THD+N | <0.3% from 1W to 0.5dB below clip (typically <0.1%) |
Front panel | |
Indicators | (LED) Active, Protect, Hi temp, DSP option, signal out -35 dB, -20 dB, -10 dB, Limiter |
Controls | Mains switch, Gain control (per channel) |
Maintenance | Removable dust filter holder |
Rear panel | |
Audio signal input connectors (per channel) | XLR male, XLR female combo jack 6.3 (balanced) |
Loudspeakers output connectors | Neutrik Speakon NL4MD (per channel) |
Networking | Data port hole for DSP option |
AC mains cordset / chassis connector | Schuko CEE 7/7 16 A / Direct |
Controls | (switch) Gain, HPF, Link/Bridge, Analog or AES3 |
AC mains power | |
Power supply | Universal regulated switch mode with PFC (Power Factor Correction) |
Operating voltage | 100-240 V +/-10%, 50-60 Hz |
Power factor correction | >0.95 @ mains power >500 W |
Current draw | @ 230 V / @ 115 V |
Idle | 0.6 A / 0.7 A |
1/8 of max output power@ 4 ohms | 5.2 A / 9.9 A |
1/4 of max output power@ 4 ohms | 9.8 A / 19.2 A |
Thermal | Operating temperature 0° - 40° C / 32° - 104° F |
Dissipation and cooling | Fan, continuosly variable speed, temperature and load current controlled, front to rear airflow |
Idle | 220 BTU/h | 55 kcal/h |
1/8 of max output power@ 4 ohms | 944 BTU/h | 238 kcal/h |
1/4 of max output power@ 4 ohms | 1669 BTU/h | 421 kcal/h |
Chassis construction | 1.2 mm steel chassis with added 1.5mm steel front pannel and removable dust filter holder with rear support ears |
Dimensions | W 483 mm / 19", H 89 mm / 2 RU, D 455 mm / 17.9" from front mounting rails |
Weight | 11.5 kg / 25.3 lb |