488_23522_2
Topthema: Ingenieurskunst in Perfektion
Revelation RX2 PRO – High-End Zweikanalendstufe von Brax
Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigen
501_17398_1
Anzeige
Topthema: Norddeutsche HiFi-Tage
2025 im Hotel Le Méridian Hamburg direkt an der Alster
Die Norddeutschen HiFi-Tage finden 2025 im Hotel Le Méridian Hamburg direkt an der Alster statt. Am 01.02.2025, von 10–18 Uhr und am 02.02.2025, von 10–16 Uhr können Interessierte bei freiem Eintritt durch die Vorführungen und Showrooms schlendern.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Kind DQ+10000
Ausstattung & technische Daten
| General | |
| Number of amplifier channels | 4 |
| Total burst power all channels | 10000 W |
| Max output power single channel EIAJ test standard, 1 kHz, 1% THD | |
| 2 ohms | 2500 W |
| 4 ohms | 2100 W |
| 8 ohms | 1250 W |
| Hi-Z 70 V (note 1) | - |
| Hi-Z 100 V (note 1) | - |
| Max output power bridged EIAJ test standard, 1 kHz, 1% THD | |
| 4 ohms | 4200 W |
| 8 ohms | 5000 W |
| Max output votage / current | 150 V / 50 A |
| Protection features | Short Circuit Protection, Current-Clip Limiter, Voltage Clip Limiter, Temperature protection |
| Amplifier audio performance | |
| Gain, selectable | 26 dB, 29 dB, 32 dB (factory set), 35 dB, 38 dB, 41dB, 44 dB |
| Input sensitivity @ 4 ohms | 2.30 V |
| Max input level | 20 dBu |
| Frequency response | 20 Hz - 20 kHz (1 W @ 8 Ohm - +/- 0.5dB) |
| S/N ratio (20 Hz - 20 kHz) | >102 dBA |
| Output circuitry | Class D |
| Input impedance | 10k balanced |
| THD+N | <0.3% from 1W to 0.5dB below clip (typically <0.1%) |
| Front panel | |
| Indicators | (LED) Active, Protect, Hi temp, DSP option, signal out -35 dB, -20 dB, -10 dB, Limiter |
| Controls | Mains switch, Gain control (per channel) |
| Maintenance | Removable dust filter holder |
| Rear panel | |
| Audio signal input connectors (per channel) | XLR male, XLR female combo jack 6.3 (balanced) |
| Loudspeakers output connectors | Neutrik Speakon NL4MD (per channel) |
| Networking | Data port hole for DSP option |
| AC mains cordset / chassis connector | Schuko CEE 7/7 16 A / Direct |
| Controls | (switch) Gain, HPF, Link/Bridge, Analog or AES3 |
| AC mains power | |
| Power supply | Universal regulated switch mode with PFC (Power Factor Correction) |
| Operating voltage | 100-240 V +/-10%, 50-60 Hz |
| Power factor correction | >0.95 @ mains power >500 W |
| Current draw | @ 230 V / @ 115 V |
| Idle | 0.6 A / 0.7 A |
| 1/8 of max output power@ 4 ohms | 6.3 A / 12.1 A |
| 1/4 of max output power@ 4 ohms | 12.0 A / 23.5 A |
| Thermal | Operating temperature 0° - 40° C / 32° - 104° F |
| Dissipation and cooling | Fan, continuosly variable speed, temperature and load current controlled, front to rear airflow |
| Idle | 220 BTU/h | 55 kcal/h |
| 1/8 of max output power@ 4 ohms | 1115 BTU/h | 281 kcal/h |
| 1/4 of max output power@ 4 ohms | 2010 BTU/h | 506 kcal/h |
| Chassis construction | 1.2 mm steel chassis with added 1.5mm steel front pannel and removable dust filter holder with rear support ears |
| Dimensions | W 483 mm / 19", H 89 mm / 2 RU, D 455 mm / 17.9" from front mounting rails |
| Weight | 11.5 kg / 25.3 lb |
