390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigen
491_17256_1
Anzeige
Topthema: Die Rückkehr einer Ikone
Revox B77 MK III
Revox präsentiert die neue Revox B77 MK III und zugleich seine neue, eigene Revox Analog Master Tapes Collection. Beides gefertigt im Revox KLANGWERK in Villingen für ein perfektes Zusammenspiel.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Cranborne Audio Camden EC1
Ausstattung & technische Daten
| Preamp | |
| Test Signal Path | APx555 (Line Out) - Input 1 - Line Output - APx555 (Line In) |
| Input Impedance | Mic= 8.9 kOhms 48v Off, 5.4 kOhms 48v ON |
| Line = 24.3 kOhms | |
| Hi-Z= 1.5 MOhm Unbalanced, 3 MOhm Balanced | |
| Max Input Level | Mic = +17.6dBu (<0.003% THD) |
| Line = +26.5dBu (<0.02% THD) | |
| Hi-Z = +24dBu (<0.02% THD) | |
| Minimum Gain | Mic= 8dB |
| Line = 0dB | |
| Hi-Z = 3dB | |
| Maximum Gain | Mic = 68dB |
| Line = 60dB | |
| Hi-Z = 63dB | |
| Equivalent Input Noise (EIN) | <-129.5dBu (150 Ohm source, unweighted) |
| <-131dBu (150 Ohm source, A-weighted) | |
| <-135.5dBu (Inputs common, unweighted) | |
| Frequency Response | ±0.7dB (<1 Hz to >1000 kHz, Min Gain) |
| ±0.7dB (<1 Hz to >1000 kHz, 35dB Gain) | |
| ±1dB (<1.5 Hz to 900 kHz, 63dB Gain) | |
| ±1dB (<5 Hz to >200 kHz, Max Gain) | |
| Phase Shift | <2.75° (20Hz to 20kHz, 40dB Gain) |
| <4° (20Hz to 20kHz, 63dB Gain) | |
| <6° (20Hz to 20kHz, Max Gain) | |
| THD+N | <0.00025% (1kHz, 35dB Gain, +24dBu out) |
| Intermodulation Distortion | <0.0006% (50Hz and 7kHz, 35dB gain, +20dBu out) |
| <0.0005% (50Hz and 7kHz, 35dB gain, +15dBu out) | |
| Hi-Pass Filter (HPF) | 80Hz, -3dB, 12dB/Oct |
| CMRR | >70dB, typ >85dB, 35dB gain, 10-20kHz, 100mV Common mode |
| Slew Rate | 20V/uS, 35dB gain, +25dBu out |
| 48v LED Thresholds | Off = 48v Off, voltage fully discharged |
| Amber = 48v voltage charging/discharging | |
| Red = 48v fully charged | |
| Signal LED Meter Thresholds | Blue = -20dBu |
| Green = -12dBu | |
| Amber = +21dBu | |
| Red = +24dBu | |
| Max Output Level | Balanced XLR = +27.5dBu (<0.002% THD, 30dB Gain) |
| Impedance Balanced ¼” Jack = +21.5dBu (<0.002% THD, 30dB Gain) | |
| Output Impedance | Balanced XLR = 150 Ohm |
| Impedance Balanced 1/4” Jack = 150Ohm Balanced, 75 Ohm Unbalanced | |
| Link Max Output Level | Impedance Balanced 1/4” Jack = +21.8dBu (<0.006% THD) |
| Link Output Impedance | Impedance Balanced 1/4” Jack = 75 Ohm |
| Unbalanced, 150 Ohm Balanced (Buffered Output) | |
| Headphone Amplifier | |
| Test Signal Path | APx555 (Line Out) - AUX Input - Headphone Output - APx555 (Line In) |
| Frequency Response | -1dB, <1Hz to >70kHz |
| THD | <0.0006% (-104.4dB) @ +20dBu, 1kHz, A-weighted, 300 Ohm load |
| THD+N | <0.00085% (-101.4dB) @ +20dBu, 1kHz, A-weighted, 300 Ohm load |
| Output Impedance | 0.33 Ohms |
| Output Wattage | 250mW x 2 @ 600 Ohms, 1kHz |
| 650mW x 2 @ 220 Ohms, 1kHz | |
| 1.21W x 2 @ 100 Ohms, 1kHz | |
| 500mW x 2 @ 32 Ohms, 1kHz | |
| Dynamic Range | 114.5dB A-weighted, AES17 method, 20Hz - 20kHz, 300 Ohm load |
| Noise Floor | -93.5dBu A-weighted, 20Hz - 20kHz, 300 Ohm load |
| Power | |
| AC Requirements | 100V – 240V AC, 50 – 60 Hz |
| Total Power Consumption | 24v, 1.25A DC, 30W |
| Environmental | |
| Operating Temperature | +1 to 35 degrees Celsius |
| Storage Conditions | -20 to 50 degrees Celsius |
| Dims/Weights | |
| Width | 220mm (8.6") (Rackmount Kit Available) |
| Height | 44.45mm (1.75") (1u) |
| Depth | 240mm (9.5") |
| Unit Weight | 1.8kg (3.9lb) |
