Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigenVon Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecherchassis Mitteltöner
Ausstattungsliste: Scanspeak Illuminator 12MU/8731T00
KEY FEATURES | |
Under-Hung Neodymium Motor Design | |
One Piece Cone-Dust Cap | |
Very Wide Frequency Response 100-10KHz | |
Patented Symmetrical Drive (SD-3) | |
Low-Loss Linear Suspension | |
High Output 87dB @ 2,83V | |
T-S Parameters | |
Resonance frequency [fs] | 66 Hz |
Mechanical Q factor [Qms] | 3.63 |
Electrical Q factor [Qes] | 0.31 |
Total Q factor [Qts] | 0.29 |
Force factor [Bl] | 6.1 Tm |
Mechanical resistance [Rms] | 0.54 kg/s |
Moving mass [Mms] | 4.7 g |
Suspension compliance [Cms] | 1.24 mm/N |
Effective diaph. diameter [D] | 86 mm |
Effective piston area [Sd] | 58 cm² |
Equivalent volume [Vas] | 5.8 l |
Sensitivity (2.83V/1m) | 87,2 dB |
Ratio Bl/√Re | 2.51 N/√W |
Ratio fs/Qts | 231 Hz |
Electrical Data | |
Nominal impedance [Zn] | 8 Ohm |
Minimum impedance [Zmin] | 7.7 Ohm |
Maximum impedance [Zo] | 75 Ohm |
DC resistance [Re] | 5.9 Ohm |
Voice coil inductance [Le] | 0.13 mH |
Power Handling | |
100h RMS noise test (IEC 17.1)* | 80 W |
Long-term max power (IEC 17.3)* | 150 W |
*Filter: 2. order HP Butterworth, 200 Hz | |
Voice Coil and Magnet Data | |
Voice coil diameter | 32 mm |
Voice coil height | 6.2 mm |
Voice coil layers | 4 |
Height of gap | 13 mm |
Linear excursion | ± 3.4 mm |
Max mech. excursion | ± 11 mm |
Unit weight | 0.7 kg |
323-2545
Masori |