Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigenDie hochwertigen Sessel und Sofas von Sofanella sind modern, bezahlbar und schaffen ein gemütliches sowie ein bequemes Heimkinoerlebnis
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Tannoy CMS 601
Specification | |
SYSTEM | |
Frequency Response (-3dB) (1) BM Back can | 78Hz - 22kHz |
Frequency Range (-10dB) (1) BM Back can | 51Hz - 24kHz |
Frequency Range (-10dB) (1) PI Back can | 46Hz - 24kHz |
System Sensitivity (1W @1m) (2) | 91dB (1W = 2.45V for 6 Ohms) |
Nominal Coverage Angle | 90 degrees conical |
Coverage Angle (1kHz to 6kHz) | 92 degrees |
Directivity Factor (Q) | 7.1 averaged 1kHz to 6kHz |
Directivity Index (DI) | 7.9 averaged 1kHz to 6kHz |
Rated Maximum SPL | Average: 108dB Peak: 112dB |
Power Handling (3) | Average: 60W Programme: 120W Peak: 240W |
Recommended Amplifier Power | 120W @ 6 Ohms |
Nominal Impedance | 6 Ohms |
Transformer Taps (via front rotary switch) | 70V: 60W / 30W / 15W / 7.5W/OFF & low impedance operation 100V: 60W / 30W / 15W / OFF & low impedance operation |
Crossover | 7kHz inductively coupled |
TRANSDUCERS | |
Low Frequency | 1 x 165mm (6.50") mineral loaded polypropylene ICT™ |
High Frequency | 1 x ICT™ aluminium dome |
PHYSICAL | |
Enclosure | Back Can: Zinc plated steel Baffle: Reflex loaded UL 94V-0 rated ABS Grille: Steel, with weather resistant coating |
Safety Features | Safety ring located at rear of enclosure for load bearing safety bond |
Clamping Design | Min / Max Clamping Range: 8.0mm (0.32") / 29.0mm (1.14") Recommended Clamp Torque: 1.5Nm |
Back Can Options | Blind Mount (BM): Complete with fixed back can Pre Install (PI): Separate back can for pre installation |
Cable Entry Options | Cable clamp & squeeze connector for conduit up to 22mm |
Conduit Knockouts | 3 Sets of horizontal positions: 19 / 22 / 28mm (0.75” / 0.87” / 1.10”) |
Connectors | Removable locking connector with screw terminals with "loop through" facility |
Safety Agency Ratings | UL-1480, UL-2043, CE |
BM Hole Cutout Diameter | 253mm (9.96") |
PI Hole Cutout Diameter | 253mm (9.96") |
Dimensions | Bezel diameter: 280mm (11.02") BM model: Front of ceiling to rear of back can 258mm (10.16") BM model: Front of ceiling to top of safety loop 275.30mm (10.84") |
PI model: Front of ceiling surface to rear of speaker unit 95.50mm (3.76") PI model: Front of accessory back can bezel to top of safety loop 168.50mm (6.60") | |
Net Weight (ea) | CMS601 BM: 6.50kg (14.33lbs) CMS601 PI: 4.00kg (8.82lbs) PI back can: 3.685kg (8.06lbs) |
Included Accessories | C Ring Tile bridge Paint mask Cutout template Grille |
Optional Accessories | Plaster (mud) ring |
305-2128
MD Sound GmbH & Co. KG |