Kategorie: AV-Sonstiges


Ausstattungsliste: Crestron AMP-1200-70


Ausstattung & technische Daten
Specification
Typ Single-Channel Modular Power Amplifier, 200W, 70V
Audio
Input Signal Types Balanced or unbalanced analog line-level
Output Power, AMP-1200-70 200 Watts @ 70 Volts nominal
Output Power, AMP-1200-100 200 Watts @ 100 Volts nominal
Frequency Response 200 Hz to 20 kHz ±0.5 dB
High-Pass Filter -3 dB @ 80 Hz, 12 dB per octave
THD+N <0.1%
S/N Ratio >100 dBA, 20 Hz to 20 kHz, balanced
Input Sensitivity 1.23 Vrms, +4 dBu, balanced; 0.316 Vrms, -10 dBV, unbalanced; For full rated output power
Go To Sleep Time 25 minutes with no signal present
Wake Time 0.5 second typical
Wake Threshold 5 to 20 mV typical
Protection Clip limiter, over current, under voltage, over temperature, DC offset, extreme high frequency
Connectors
SPEAKER OUT (1) 2-pin 7.62 mm reversed gender 20A detachable terminal block; Power amplifier output; Wire Size: Terminals accept up to 12 AWG (3.31 mm²);
AUDIO IN L/R (unbalanced) (2) RCA connectors, female; Unbalanced line-level audio inputs (summed); Maximum Input Level: 2.24 Vrms, +7 dBV (+9.2 dBu)
AUDIO IN L/R (balanced) (1) 5-pin 3.5 mm detachable terminal block; Balanced line-level audio inputs (summed); Maximum Input Level: 7.75 Vrms, +20 dBu; Input Impedance: 20k Ohms
(1) 6-32 screw; Chassis ground lug
100-240V~1A 50/60 Hz (1) IEC 60320 C14 main power inlet; Mates with removable power cord, included
Power
Main Power 1 Amp @ 100-240 Volts AC, 50/60 Hz
Power Consumption 45 Watts, driven at 1/8th output power; 16 Watts, idle; <0.5 Watt, standby (sleep)
Environmental
Temperature 41° to 104°F (5° to 40°C)
Humidity 10% to 90% RH (non-condensing)
Construction
Chassis Metal, convection-cooled (fanless), vented front and rear
Front Panel Metal, black finish with polycarbonate label overlay
Mounting Freestanding, surface-mount, or 1/2-width 1 RU 19-inch rack-mountable; gangable with other Crestron modular AMP series products (adhesive feet, surface mounting kit, ganging kit, and rack mounting kit included)
Dimensions
Height 1.74 in (45 cm) without feet; 1.82 in (47 mm) with surface kit
Width 8.65 in (220 mm); 9.75 in (248 mm) with surface kit; 19.00 in (483 mm) with rack kit
Depth 10.46 in (266 mm)
Weight 4.2 lb (1.9 kg) without mounting kits; 4.5 lb (2.0 kg) maximum with surface or rack kit
Neu im Shop

ePaper Jahres-Archive, z.B. Car & Hifi

ePaper Jahres-Archive, z.B. Car & Hifi
>> mehr erfahren
488_23522_2
Topthema: Ingenieurskunst in Perfektion
Ingenieurskunst_in_Perfektion_1728396881.jpg
Revelation RX2 PRO – High-End Zweikanalendstufe von Brax

Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.

>> Mehr erfahren
kostenloses Probeexemplar Cover Probeexemplar
Jetzt laden (englisch, PDF, 9.28 MB)
kostenloses Probeexemplar Cover Probeexemplar
Jetzt laden (, PDF, 9.25 MB)
kostenloses Probeexemplar Cover Probeexemplar
Jetzt laden (, PDF, 7.33 MB)
kostenloses Probeexemplar Cover Probeexemplar
Jetzt laden (, PDF, 14.78 MB)
kostenloses Probeexemplar Cover Probeexemplar
Jetzt laden (deutsch, PDF, 7 MB)
Interessante Links:
  • www.hausgeraete-test.de
  • www.heimwerker-test.de
  • hifitest.de/shop/
Allgemeine Händlersuche
Landkarte PLZ0 PLZ1 PLZ2 PLZ3 PLZ4 PLZ5 PLZ6 PLZ7 PLZ8 PLZ9

Klicken Sie auf Ihre PLZ oder wählen Sie ein Land

Händler des Tages

HiFi Center Liedmann