Kategorie: Profi- / Musiker-Equipment


Ausstattungsliste: Kind K2B


Ausstattung & technische Daten
General
Number of amplifier channels 2
Total burst power all channels 3500 W
Max output power single channel EIAJ test standard, 1 kHz, 1% THD
2 ohms 1750 W
4 ohms 1200 W
8 ohms 700 W
Hi-Z 70 V (note 1) 1000 W
Hi-Z 100 V (note 1) -
Max output power bridged EIAJ test standard, 1 kHz, 1% THD
4 ohms 3500 W
8 ohms 2400 W
Max output votage / current 112 V / 42 A
Protection features Short Circuit Protection, Current-Clip Limiter, Voltage Clip Limiter, Temperature protection
Amplifier audio performance
Gain, selectable 26 dB, 32 dB (factory set)
Input sensitivity @ 4 ohms 1.74 V
Max input level 20dBu
Frequency response 20 Hz - 20 kHz (1 W @ 8 Ohm - +/- 0.5dB
S/N ratio (20 Hz - 20 kHz) >106 dBA
Output circuitry Class D
Input impedance 10k balanced
THD+N <0.3% from 1W to 0.5dB below clip (typically <0.1%)
Front panel
Indicators (LED) Active, Protect, Hi temp, DSP option, signal out -35 dB, -20 dB, -10 dB, Limiter
Controls Mains switch, Gain control (per channel)
Maintenance Removable dust filter holder
Rear panel
Audio signal input connectors (per channel) XLR female combo 1/4 phone jack TRS, 3-pin terminal block (balanced)
Loudspeakers output connectors Neutrik Speakon NL4MD (per channel)
Networking Data port hole for DSP option
AC mains cordset / chassis connector Schuko CEE 7/7 16 A / IEC20A
Controls (switch) HPF 30 Hz or 75 Hz, Link/Bridge, Analog or AES3
AC mains power
Power supply Switch mode power supply, internally switchable 230 / 115 V nominal
Operating voltage 100-240 V +/-10%, 50-60 Hz
Current draw @ 230 V / @ 115 V
Idle 0.6 A / 0.7 A
1/8 of max output power@ 4 ohms 2.2 A /4.0 A
1/4 of max output power@ 4 ohms 3.9 A / 7.2 A
Thermal Operating temperature 0° - 40° C / 32° - 104° F
Dissipation and cooling Fan, continuosly variable speed, temperature and load current controlled, front to rear airflow
Idle 220 BTU/h | 55 kcal/h
1/8 of max output power@ 4 ohms 475 BTU/h | 120 kcal/h
1/4 of max output power@ 4 ohms 731 BTU/h | 184 kcal/h
Chassis construction 1.0 mm / 0.04" zinc steel chassis with removable dust filter holder; 3mm / 0.12" front panel ears and side reinforcement with rear support
Dimensions W 483 mm / 19", H 89 mm / 2 RU, D 390 mm / 15.4" from front mounting rails
Weight 8.5 kg / 18.7lb
DSP (optional)
Available in the MODEL Kxx DSP
Inputs 2
Outputs 4
A/D converter NA
D/A converter NA
Frequency response @ -3dB 7 Hz - 22 kHz
THD < 0.01% (20 Hz - 20 kHz)
Presets Bank of 8 presets selectable from rear panel, setup and upload via USB with AD sigma studio.
Delay for time alignement 10 ms per output
Crossover filters Butterworth, Linkwitz-Riley, Bessel, from 6 dB/oct to 48 dB/oct
Output equalizer up to 12 biquad fully parametric per channel: peaking, hi/lo shelving, hi/lo pass, band pass, band stop, all pass
Input equalizer up to 5 biquad filters: PEQ, shelving, band pass, band stop, all pass
Limiters Peak limiter, RMS limiter, frequency dependent RMS limiter
Neu im Shop

ePaper Jahres-Archive, z.B. Hifi Test

ePaper Jahres-Archive, z.B. Hifi Test
>> mehr erfahren
488_23522_2
Topthema: Ingenieurskunst in Perfektion
Ingenieurskunst_in_Perfektion_1728396881.jpg
Revelation RX2 PRO – High-End Zweikanalendstufe von Brax

Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.

>> Mehr erfahren
kostenloses Probeexemplar Cover Probeexemplar
Jetzt laden (englisch, PDF, 9.28 MB)
kostenloses Probeexemplar Cover Probeexemplar
Jetzt laden (, PDF, 9.25 MB)
kostenloses Probeexemplar Cover Probeexemplar
Jetzt laden (, PDF, 7.33 MB)
kostenloses Probeexemplar Cover Probeexemplar
Jetzt laden (, PDF, 14.78 MB)
kostenloses Probeexemplar Cover Probeexemplar
Jetzt laden (deutsch, PDF, 7 MB)
Interessante Links:
  • www.hausgeraete-test.de
  • www.heimwerker-test.de
  • hifitest.de/shop/
Allgemeine Händlersuche
Landkarte PLZ0 PLZ1 PLZ2 PLZ3 PLZ4 PLZ5 PLZ6 PLZ7 PLZ8 PLZ9

Klicken Sie auf Ihre PLZ oder wählen Sie ein Land

Händler des Tages