390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigen
489_23584_2
Topthema: Träume werden wahr
Standlautsprecher · ESS AMT-1 D Revival
Für die Älteren unter uns gehören diese Lautsprecher zu den ersten jugendlichen Audiowunschträumen, wie zum Beispiel das Klipschorn oder die Electro Voice Sentry III. Für alle anderen könnte dieser besondere Lautsprecher eine echte Überraschung werden.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Grace Design m103
Ausstattung & technische Daten
| Technical Specifications | |
| Channel Strip - mic preamplfier / EQ / compressor | |
| GAIN RANGE (5dB steps) | |
| Mic input | 10-65dB |
| Hi-Z input | -10-45dB |
| THD+N 1kHz, 22Hz-22kHz BW | |
| @ 20dB Gain +20dBu out | <0.00085% |
| @ 40dB Gain +20dBu out | <0.0010% |
| @ 60dB Gain +20dBu out | <0.0050% |
| INTERMODULATION DISTORTION | |
| @ 40dB Gain +20dBu out SMPTE/DIN 4:1 7kHz/50Hz | <0.0020 |
| NOISE - REFERRED TO INPUT @60dB Gain 22Hz-22kHz BW | |
| 50Ω source | <-130dB |
| 150Ω source | <-128dB |
| 600Ω source | <-124dB |
| CMRR @60dB Gain, 3.5Vcm | |
| 100Hz | >60dB |
| 1kHz | >75dB |
| 10kHz | >65dB |
| FREQUENCY RESPONSE (Input to DI Output) | |
| Mic input @ 40dBm Gain -3dB | 3.7Hz-140kHz |
| Hi-Z input @ 20dB Gain -3dB | 1.2Hz-112kHz |
| IMPEDANCE | |
| Mic input | 8.1kΩ |
| Mic input, Ribbon mode | 20kΩ |
| Hi-Z input (unbalanced) | 2.5MΩ |
| Hi-Z input (balanced) | 5MΩ |
| Balanced Output | 300Ω |
| Unbalanced Output | 150Ω |
| PEAK LED METER | |
| Green threshold | -10dBu |
| Red threshold | +16dBu |
| MAXIMUM OUTPUT LEVEL | |
| 100k Ohm load, 0.1% THD | +28dBu |
| EQ/COMP Section GAIN RANGE | |
| Output Trim | -10 - +10dB |
| EQ: 3 Bands of 0-12dB Cut or Boost | |
| Low Frequency Range | 20Hz – 750Hz |
| Mid Frequency Range | 500Hz – 4kHz |
| Mid Frequency Q | 0.5 – 5 |
| High Frequency Range | 3kHz – 20kHz |
| Compressor – Inserts Pre or Post EQ | |
| Threshold Range | -15 - +15 dBu |
| Attack Range | 3 – 200 ms |
| Release Range | 0.03 – 3 s |
| Ratio Range | Ratio Range |
| Gain Reduction | Gain Reduction |
| THD+N 1kHz, 22Hz-22kHz BW | |
| @ 0dB Gain +20dBu out | <0.002% |
| INTERMODULATION DISTORTION | |
| @ 0dB Gain +20dBu out SMPTE/DIN 4:1 7kHz/50Hz | <0.002% |
| OUTPUT NOISE 22Hz-22kHz BW | |
| @0dB Gain | <-78dB |
| CMRR @0dB Gain, 3.5Vcm | |
| 100Hz | >75dB |
| 1kHz | >75dB |
| 10kHz | >75dB |
| FREQUENCY RESPONSE | |
| @0dB Gain -3dB | 0.016Hz-150kHz |
| IMPEDANCE | |
| Line In | 24kΩ |
| Main Out balanced | 350Ω |
| Main Out unbalanced | 150Ω |
| Link In – sidechain mode | 100kΩ |
| LEVEL METERS | |
| EQ Peak threshold | 6 dB below interstage clipping |
| Output Level VU Meter | 0dB VU = +4dBu output |
| Gain Reduction Meter | 0-10dB Gain Reduction |
| MAXIMUM OUTPUT LEVEL | |
| 100k Ohm load, 0.1% THD | +28dBu |
| POWER CONSUMPTION | |
| 85-264VAC / 120-370VDC | 14 Watts Max |
| WEIGHT and DIMENSIONS | |
| Weight | 2.05 kg |
| Dimensions | H4.3cm x W48.3cm x D22.9cm |
