Die hochwertigen Sessel und Sofas von Sofanella sind modern, bezahlbar und schaffen ein gemütliches sowie ein bequemes Heimkinoerlebnis
>> Mehr erfahren>> Alle anzeigenForm follows function ist ja ein geflügeltes Wort für Design um die technischen Notwendigkeiten herum. Dass man aber auch beide Aspekte gleichwertig behandeln und auf die Spitze treiben kann, zeigt uns die neue Serie 1528 von Arendal.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecherkabel
Ausstattungsliste: van den Hul NOVA
Specification | |
Cable Type | Shielded quadruple conductor |
Conductor Material | HYBRID: High purity dense Silver coated high purity Matched Crystal OFC + Linear Structured Carbon ® saturated layer(s) |
Design Purpose/ Application Area(s) | Highest quality loudspeaker single, bi-wiring and bi-amping connections / High-end home, car hi-fi and PA applications |
Eff. Conductor Ø/Eq. AWG No./Strands | Each signal lead: 8.4 mm² / AWG 8 / 133 Two signal leads combined: 16.8 mm² / AWG 5 / 266 |
External Diameter / -Dimensions | 27.0 mm. wide; 7.5 mm. thick |
Resistance 20 °C / 68 °F | Each signal lead: 2.2 Ohm/km. Two signal leads combined: 1.1 Ohm/km. Screen: 2.2 Ohm/km. |
Capacitance | 180 pF/m. |
Insulation / Dielectric Strength / Test Voltage | Cores: Polyethylene; Jacket: HULLIFLEX ® EHD / 300 Vrms min. |
Connector Types Suitable | When combining leads into pairs (e.g. as twin lead speaker cable or at amplifier side of bi-wiring cable): |
Our 10.0 mm. Ø cable entrance diameter Bus type Universal Speaker Connectors or our 10.0 mm. Ø cable entrance diameter BERRI Bus Connectors; Custom mountable on ordered lengths; | |
For termination of individual leads: | |
Our 6.5 mm. Ø cable entrance diameter Bus type Universal Speaker Connectors or our 6.5 mm. Ø cable entrance diameter BERRI Bus Connectors; Custom mountable on ordered lengths. | |
Standard Sales Units / -Lengths | Available in any specified length. With connectors mounted the cable is also available in stereo pairs (i.e. two separate cables) in the following standard configurations: |
-Bi-amping configuration: Each of both cables having 4 connectors at the amplifier side and 4 connectors at the speaker side. | |
-Bi-wiring configuration: Each of both cables having 2 connectors at the amplifier side and 4 connectors at the speaker side. | |
-Normal wiring configuration: Each of both cables having 2 connectors at the amplifier side and 2 connectors at the speaker side. | |
Jacket Colours Available | Transparent ruby red |
Remarks | Self mounting of connectors is not advised since special soldering equipment is required; Our custom connector mounting service is available. |
Mounting: | |
-When twin lead wiring a loudspeaker, both red and orange conductors should be combined to form the loudspeaker + connection. Likewise, both black and brown conductors should be combined to form the loudspeaker – connection. | |
-When bi-wiring or bi-amping a loudspeaker, the red and black conductor pair is used to connect one speaker section and the orange and brown conductor pair to connect the other speaker section. | |
-If your loudspeakers are not equipped with ground terminals, the cable screen should be connected to the power amplifier’s dedicated ground terminal (or chassis) and should be left disconnected at the loudspeaker end. | |
If it is impossible to connect the screen to any ground terminal (or chassis screw) at the amplifier, the screen should be connected to the amplifier’s loudspeaker – terminal of the channel in question. | |
-If your loudspeakers are equipped with ground terminals, the cable screen should connect between the power amplifier and loudspeaker’s dedicated ground terminals. | |
Our The SUPER NOVA is a thicker 4x(13.4 mm² / AWG 6) version of this cable. |
262-2322
hifisound Lautsprechervertrieb |