Topthema: Die Rückkehr einer Ikone Revox B77 MK III

Revox präsentiert die neue Revox B77 MK III und zugleich seine neue, eigene Revox Analog Master Tapes Collection. Beides gefertigt im Revox KLANGWERK in Villingen für ein perfektes Zusammenspiel.

>> Mehr erfahren >> Alle anzeigen

488_23522_2

Topthema: Ingenieurskunst in Perfektion Revelation RX2 PRO – High-End Zweikanalendstufe von Brax

Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.

>> Mehr erfahren >> Alle anzeigen

Kategorie: Lautsprecherkabel

Ausstattungsliste: van den Hul INSPIRATION HYBRID

Ausstattung & technische Daten

Specification
Cable Type	Screened 5 conductor
Conductor Material	FUSION TECHNOLOGY: amorphous Cu/Zn/Ag alloy + HYBRID: Linear Structured Carbon ® saturated layer(s)
Design Purpose/ Application Area(s)	Highest quality loudspeaker cable / Exotic DIY interconnect
Eff. Conductor Ø/Eq. AWG No./Strands	Each signal lead: 1.97 mm² / ~AWG 14 / 98 Ground lead: 0.56 mm² / AWG 19.6 / 7 Screen: 4.45 mm² / AWG 10.7 / 252
External Diameter / -Dimensions	11.5 mm.
Resistance 20 °C / 68 °F	Two red or blue signal leads combined: 1.4 Ohm/100 m. Central ground lead: 3.2 Ohm/100 m. Screen: 0.45 Ohm/100 m.
Capacitance	318 pF/m.
Insulation / Dielectric Strength / Test Voltage	Cores: HULLIFLEX ® 4; Jacket: HULLIFLEX ® 4 / 300 Vrms min.
Connector Types Suitable	When combining leads into pairs (e.g. as twin lead speaker cable or at amplifier side of bi-wiring cable):
Our 5.0 mm. Ø cable entrance diameter Bus type Universal Speaker Connectors or our 8.3 mm. Ø cable entrance diameter BERRI Bus Connectors; Custom mountable on any length ordered.
For termination of individual leads:
Our 3.0 mm. Ø cable entrance diameter Bus type Universal Speaker Connectors or our 4.5 mm. Ø cable entrance diameter BERRI Bus Connectors or our DIY Screw-On Speaker Connectors; All custom mountable on any length ordered.
Standard Sales Units / -Lengths	50 m. reels; With connectors mounted to specifications: any length; Without connectors: please consult your van den Hul dealer or the van den Hul distributor in your country.
With connectors mounted the cable is also available in stereo pairs (i.e. two separate cables) in the following standard configurations:
-Bi-amping configuration: Each of both cables having 4 connectors at the amplifier side and 4 connectors at the speaker side.
-Bi-wiring configuration: Each of both cables having 2 connectors at the amplifier side and 4 connectors at the speaker side.
-Normal wiring configuration: Each of both cables having 2 connectors at the amplifier side and 2 connectors at the speaker side.
Jacket Colours Available	Gold tone
Remarks	Mounting:
-When twin lead wiring a loudspeaker, the two internal red leads should be combined to form the loudspeaker + connection. Likewise, the two blue leads should be combined to form the loudspeaker – connection.
-When bi-wiring or bi-amping a loudspeaker, the first red and blue conductor pair is used to connect one speaker section and the second red and blue conductor pair to connect the other speaker section.
-When ordered with connectors mounted, The INSPIRATION HYBRID comes ready made with a ground lead at each side of the cable:
At the cable end located in the direction of the “van” side of the “van den Hul” cable printing (i.e. at the amplifier side), both the cable shield and the cable’s central ground lead are connected together
and exit as a ground lead, which is to be connected to the power amplifier’s dedicated ground terminal (or chassis).
If it is impossible to connect this ground lead to any ground terminal (or chassis screw) at the amplifier, it can be connected to the amplifier’s “–” (i.e. black) output terminal of the channel in question.
At the cable end located in the direction of the “Hul” side of the “van den Hul” cable printing (i.e. at the loudspeaker side), the cable shield is left disconnected. Here only the cable’s central ground wire exits as a ground lead.
If your loudspeakers are equipped with ground terminals, this ground lead should be connected to the speaker’s ground terminal of the channel in question.
If your loudspeakers are not equipped with ground terminals, this ground lead should be left disconnected.