488_23522_2
Topthema: Ingenieurskunst in Perfektion
Revelation RX2 PRO – High-End Zweikanalendstufe von Brax
Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigen
487_23559_2
Topthema: Totale Eleganz
Arendal 1528 Monitor 8
Form follows function ist ja ein geflügeltes Wort für Design um die technischen Notwendigkeiten herum. Dass man aber auch beide Aspekte gleichwertig behandeln und auf die Spitze treiben kann, zeigt uns die neue Serie 1528 von Arendal.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Tannoy CMS 801sub
Ausstattung & technische Daten
| Specification | |
| SYSTEM | |
| Frequency Response (-3dB) (1) BM Back can | 58Hz - 160Hz |
| Frequency Range (-10dB) (1) BM Back can | 42Hz - 300Hz |
| System Sensitivity (1W @1m) (2) | 92dB (1W = 2.45V for 6 Ohms) |
| Rated Maximum SPL | Average: 112dB |
| Peak | 118dB |
| Average (with THP60) | 110dB |
| Power Handling Average | 100W |
| Programme | 200W |
| Peak | 400W |
| Recommended Amplifier Power | 200W @ 6 Ohms |
| Nominal Impedance | 6 Ohms |
| Transformer Taps (via front rotary switch) | 70V: 60W / 30W / 15W / 7.5W / OFF & Low Impedance operation 100V: 60W / 30W / 15W / OFF & Low Impedance operation |
| Distortion | 10% Full Power (7.75V) 2nd Harmonic 70Hz: 1.22% 100Hz: 0.38% 3rd Harmonic 70Hz: 1.90% 100Hz: 0.49% |
| 1% Full Power (2.45V) 2nd Harmonic 70Hz: 0.91% 100Hz: 0.04% 3rd Harmonic 70Hz: 1.28% 100Hz: 0.44% | |
| Crossover | Integral 2nd order passive, 160 Hz |
| TRANSDUCERS | 1x 200mm (8.00") Long throw woofer with multi fibre paper pulp cone |
| Backcan | Zinc plated steel |
| Baffle | Reflex loaded UL 94V-0 rated ABS |
| Grille | Steel, with weather resistant coating |
| Safety Features | Safety ring located at rear of enclosure for load bearing safety bond |
| Clamping Design | Security toggle clamp |
| Blind Mount (BM) | Complete with fixed back can |
| Pre Install (PI) | Separate back can for pre-installation |
| Cable Entry Options | Cable clamp & squeeze connector for conduit up to 22mm |
| Conduit Knockouts | 3 Sets of horizontal positions 19 / 22 / 28mm 0.75 / 0.87 / 1.10" |
| Connectors | Removable locking connector with screw terminals with "loop through" facility |
| Safety Agency Ratings | UL-1480, UL-2043, CE |
| BM Hole Cutout Diameter | 295mm (11.61") |
| PI Hole Cutout Diameter | 295mm (11.61") |
| Dimensions | |
| Bezel Diameter | 325mm (12.80") |
| BM model: Front of ceiling to rear of back can | 310.5mm (12.22") |
| BM model: Front of ceiling to top of safety loop | 327.8mm (12.90") |
| PI model: Front of ceiling to rear of speaker unit | 117.50mm (4.63") |
| PI model: Front of accessory back can bezel to top of safety loop (PI) | 168.5mm (6.63") |
| Net Weight (ea) | |
| CMS801 SUB BM | 6.3kg (13.89lbs) |
| CMS801 SUB PI | 3.2kg (7.05lbs) |
| PI Backcan | 4kg (8.81lbs) |
| Included Accessories | C Ring Tile bridge Paint mask Cutout template Grille |
| Optional Accessories | Plaster (mud) ring Back can for PI model |
Top Händler
|
305-2128
MD Sound GmbH & Co. KG |
