Die hochwertigen Sofas der Serie "Dubai" von Sofanella schaffen ein gemütliches und bequemes Heimkinoerlebnis.
>> Mehr erfahren>> Alle anzeigenDie Frankfurter HiFi-Tage sind DIE Gelegenheit für einen ausgiebigen HÖRTEST. Nach über 20 Jahren treffen sich Musik- und HiFi-Fans wieder in Frankfurt, um sich einen Überblick über die neusten und angesagtesten Technologien zur hochwertigen Musikwiedergabe zu verschaffen.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Tannoy CMS 503DC
Specification | |
SYSTEM | |
Frequency Response (-3 dB) (1) BM Backcan | 85 Hz - 50 kHz |
Frequency Range (-10 dB) (1) BM backcan model | 74 Hz - 54 kHz |
Frequency Range (-10dB) (1) PI fitted with backcan | 70 Hz - 54 kHz |
System Sensitivity (1W @ 1m) (2) | 89 dB (1 W = 4 V for 16 Ohms) |
Nominal Coverage Angle | 90 degrees conical |
Power Handling (3) | Average: 60 W |
Programme: 120 W | |
Peak: 240 W | |
Recommended Amplifier Power | 120 W @ 16 ohms |
Nominal Impedance (Lo, Z) | 16 Ohms |
Rated Maximum SPL | Average: 107 dB |
Peak: 113 dB | |
Transformer Taps (via front rotary switch) | 70 V: 30 W (165 O) / 15 W (330 O) / 7.5 W (660 O) / 3.75 W (1320 O) / OFF & low impedance operation |
100 V: 30 W (330 O) / 15 W (660 O) / 7.5 W (1320 O) / OFF & low impedance operation | |
TRANSDUCERS | |
Dual Concentric point source driver | 1 x 130 mm (5.0”) Dual Concentric driver, using Omnimagnet technology |
Low Frequency | 35 mm (1.38”) voice coil, treated multi fiber paper pulp cone |
High Frequency | 20 mm (0.79”) PEI dome |
PHYSICAL | |
Enclosure | Backcan: Zinc plated steel |
Baffle: Reflex loaded UL 94V-0 rated ABS | |
Grille: Steel, with weather resistant coating | |
Safety Features | Safety ring located at rear of enclosure for load bearing safety bond |
Clamping Design | Security toggle clamp |
Blind Mount (BM) | Complete with fixed backcan |
Pre Install (PI) | Separate backcan for pre-installation |
Cable Entry Options | Cable clamp & squeeze connector for conduit up to 22 mm |
Conduit Knockouts on PI Backcan | 3 Sets of horizontal positions 19 / 22 / 28 mm (0.75” / 0.87” / 1.10”) |
Connectors | Removable locking connector with screw terminals with “loop through” facility |
Dimensions | |
Bezel Diameter | 205.9 mm (8.11”) |
BM Model: Front of ceiling to rear of backcan | 188.0 mm (7.40”) |
BM Model: Front of ceiling to top of safety loop | 205.3 mm (8.08”) |
PI Model: Front of ceiling surface to rear of speaker unit | 133.3 mm (5.25”) |
PI Model: Front of accessory backcan bezel to top of safety loop | 153.5 mm (6.04”) |
Hole cutout diameter (all models) | 190 mm (7.48”) |
Net Weight (ea) | CMS 503DC BM: 4.10 kg (9.04 lbs) |
CMS 503DC PI: 3.1 kg (6.83 lbs) | |
CMS 503 PI Backcan: 2.6 kg (5.73 lbs) | |
Included Accessories | C Ring Tile bridge Paint mask Cutout template Grille |
Optional Accessories | Plaster (Mud) ring |
Packed Quantity | 2 |
305-2128
MD Sound GmbH & Co. KG |