Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigenDie hochwertigen Sessel und Sofas von Sofanella sind modern, bezahlbar und schaffen ein gemütliches sowie ein bequemes Heimkinoerlebnis
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Tannoy CMS 503ICT
Specification | |
SYSTEM | |
Frequency Response (-3 dB) (1) BM Backcan | 85 Hz - 22 kHz |
Frequency Range (-10 dB) (1) BM backcan model | 74 Hz - 24 kHz |
Frequency Range (-10dB) (1) PI fitted with backcan | 71 Hz - 24 kHz |
System Sensitivity (1W @ 1m) (2) | 89 dB (1 W = 4 V for 16 Ohms) |
Nominal Coverage Angle | 90 degrees conical |
Coverage Angle (1 kHz to 6 kHz) | 105 degrees |
Directivity Factor (Q) | 5.6 averaged 1 kHz to 6 kHz |
Directivity Index (DI) | 7.0 averaged 1 kHz to 6 kHz |
Power Handling (3) | Average: 50 W |
Programme: 100 W | |
Peak: 200 W | |
Recommended Amplifier Power | 100 W @ 16 ohms |
Nominal Impedance (Lo, Z) | 16 Ohms |
Rated Maximum SPL | Average: 106 dB |
Peak: 112 dB | |
Transformer Taps (via front rotary switch) | 70 V: 30 W (165 O) / 15 W (330 O) / 7.5 W (660 O) / 3.75 W (1320 O) / OFF & low impedance operation |
100 V: 30 W (330 O) / 15 W (660 O) / 7.5 W (1320 O) / OFF & low impedance operation | |
Crossover | 7 kHz inductively coupled |
TRANSDUCERS | |
Low Frequency | 130 mm (5.00”) mineral loaded polypropylene |
High Frequency | ICT aluminium dome |
PHYSICAL | |
Enclosure | Backcan: Zinc plated steel |
Baffle: Reflex loaded UL 94V-0 rated ABS | |
Grille: Steel, with weather resistant coating | |
Safety Features | Safety ring located at rear of enclosure for load bearing safety bond |
Clamping Design | Security toggle clamp |
Blind Mount (BM) | Complete with fixed backcan |
Pre Install (PI) | Separate backcan for pre-installation |
Cable Entry Options | Cable clamp & squeeze connector for conduit up to 22 mm |
Conduit Knockouts on PI Backcan | 3 Sets of horizontal positions 19 / 22 / 28 mm (0.75” / 0.87” / 1.10”) |
Connectors | Removable locking connector with screw terminals with “loop through” facility |
Compliance | UL-1480, UL-2043, CE |
Dimensions | |
Bezel Diameter | 205.9 mm (8.11") |
BM Model: Front of ceiling to rear of backcan | 188.5 mm (7.42") |
BM Model: Front of ceiling to top of safety loop | 205.8 mm (8.10") |
PI Model: Front of ceiling surface to rear of speaker unit | 131.8 mm (5.19") |
PI Model: Front of accessory backcan bezel to top of safety loop | 153.5 mm (6.04") |
Hole cutout diameter (all models) | 190 mm (7.48”) |
Net Weight (ea) | CMS 503ICT BM 3.85 kg (8.49 lbs) |
CMS 503ICT PI 2.85 kg (6.28 lbs) | |
PI Backcan 2.6 kg (5.73 lbs) | |
Included Accessories | C Ring Tile bridge Paint mask Cutout template Grille |
Optional Accessories | Plaster (Mud) ring |
Arco Grille | |
Packed Quantity | 2 |
305-2128
MD Sound GmbH & Co. KG |