Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenDie hochwertigen Sessel und Sofas von Sofanella sind modern, bezahlbar und schaffen ein gemütliches sowie ein bequemes Heimkinoerlebnis
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Tannoy CVS 4 Micro
Specification | |
System | |
Frequency Response (-3dB) 1 | 110Hz - 19kHz |
Frequency Range (-10dB) 1 | 90Hz - 22kHz |
System Sensitivity (1W @1m) 2 | 87dB (1W = 2.45V for 6 Ohms) |
Nominal Coverage Angle | 90 degrees conical |
Coverage Angle (1kHz to 6kHz) | 102 degrees conical |
Directivity Factor (Q) | 5.6 averaged 1kHz to 6kHz |
Directivity Index (DI) | 7.1 averaged 1kHz to 6kHz |
Rated Maximum SPL | Average 103 dB, Peak 109 dB |
Power Handling | Average 40 W, Programme 80 W, Peak 160 W |
Recommended Amplifier Power | 80W @ 6 Ohms |
Nominal Impedance | 6 Ohms |
Transformer Taps (via front rotary switch) | |
70V | 15W / 7.5W / 3.5W / 1.9W / OFF & Low Impedance operation |
100V | 15W / 7.5W / 3.75W / OFF & Low Impedance operation |
Distortion | |
10% Full Power | |
250Hz | 2nd Harmonic 0.231% 3rd Harmonic 0.112% |
1kHz | 2nd Harmonic 0.229% 3rd Harmonic 0.253% |
10kHz | 2nd Harmonic 0.163% 3rd Harmonic 0.025% |
1% Full Power | |
250Hz | 2nd Harmonic 0.99% 3rd Harmonic 0.169% |
1kHz | 2nd Harmonic 0.816% 3rd Harmonic 0.027% |
10kHz | 2nd Harmonic 0.444% 3rd Harmonic 0.07% |
Crossover | 2.7kHz |
Transducers | Coaxial |
Low Frequency | 100mm (4.00") mineral loaded cone material |
High Frequency | 19mm (0.75") |
Physical | |
Enclosure | Blind Mount (BM) |
Backcan | Zinc Plated Steel |
Baffle | Reflex loaded UL 94V-0 rated ABS |
Grille | Steel, with weather resistant coating |
Safety Features | Safety ring located at rear of enclosure for load bearing safety bond |
Clamping Design | Security Toggle Clamp |
Cable Entry Options | Cable Clamp & Squeeze connector for conduit up to 22mm |
Connectors | Removable locking connector with screw terminals with "loop through" facility |
Safety Agency Ratings | UL-1480, UL-2043, CE |
Dimensions | |
Bezel Diameter | 213mm (8.39") |
Front of Ceiling to Rear of Backcan | 98.3mm (3.87") |
Front of Ceiling to cable entry centre | 46.5mm (1.83") |
Template hole cutout size | 180mm (7.09") |
Net Weight (ea) | 2.60kg (5.72lbs) |
Included Accessories | C Ring, tile bridge, paint mask, cutout template, grille |
Optional Accessories | Plaster (mud) ring |
305-2128
MD Sound GmbH & Co. KG |